Featured Products

DESCRIPTION

The Clef Audio Soloist-50 is a stereo integrated amplifier running in either Class A or AB mode.  

For the purest at heart, it has an output of 10watts per channel in pure class A mode.  In class AB mode, the output is 50watts per channel and doubles to 100watts with a 4 ohms load. 

Featuring a dual monaural design with true balanced input and circuitry, the Soloist-50 includes further high-end features such as Digitally-Controlled Step Attenuator Volume control, high-grade power supply, and solid aluminium cabinetry. 

Winner of a Good Design Award, the Soloist-50 is an audiophile-grade amplifier at an incredibly reasonable price. 

SPECIFICATIONS

• TYPE  Solid State
• CONFIGURATION  Dual-Mono
• POWER SUPPLY TRANSFORMER  2 x 200VA
• POWER SUPPLY CAPACITANCE  120,000µF
• CLASS OF OPERATION  A/AB
• SINGLE ENDED INPUTS (RCA)  3 pairs
• BALANCED INPUTS (XLR)  1 pair
• INPUT SENSITIVITY  160mV RMS
• INOUT IMPEDANCE  44 Kohms
• MAXIMUM INPUT LEVEL  3.6 Vrms Balanced/UnBalanced
• OUTPUT DEVICE TYPES  Bipolars / 6 per channel
• OUTPUT BINDING POSTS  Gold-plated
• OUTPUT POWER (CLASS-A)  10 Watts per channel
• OUTPUT POWER @ 8 OHMS  50 Watts per channel
• OUTPUT POWER @ 4 OHMS  100 Watts per channel
• VOLUME STEPS  64Steps / 1.0dB
• GAIN  42dB
• SIGNAL-TO-NOISE RATIO  100dB @ full power
• FREQUENCY RESPONSE  20Hz - 56kHz (+0/-3dB)
• CROSSTALK @ 1kHz  -100dB
• THD (20Hz - 20kHz @ 1W)  < 0.01%
• THD (20Hz - 20kHz @ 50W)  < 0.04%
• POWER CONSUMPTION @ IDLE/MAX  200 / 300Watts
• AC POWER REQUIREMENTS  220-230V / 50Hz
• SHIPPING WEIGHT  18 kgs
• DIMENSIONS (W x H x D)  432 x 112 x 400 mm

AQ WEGA 73 LOUDSPEAKERS

DESCRIPTION

The AQ Wega MKIII series from Acoustique Quality received several important updates while retaining base characteristics. New manufacturing technologies allow truly contemporary enclosure designs that highlight the beauty of natural woods and create timeless interior components.

Sophisticated and contemporary ported two-way loudspeaker that praises streamlined design and respects acoustical principles. Stunning combination of natural woods and satin lacquer base. Baffle is smooth and clean without any unnecessary elements. Elegant lines flow into each other and create cohesive design harmony. The drivers are integrated in layered sandwich baffle, eliminating uneven driver/baffle transition, minimizing diffraction and having a positive effect on speaker directivity. Trapezoidal enclosure cross-section makes the loudspeaker very rigid and removes unwanted standing waves. Trapezoidal body is then organically connected to a rigid base that features a trio of adjustable spikes that can be placed on virtually any surface. Plastic cups are provided to protect flooring. This solution suppresses transmission of vibration between the loudspeakers and the environment. The bass is taut and dynamic and the midrange is superbly transparent, resulting in accurate and realistic vocal reproduction.

1” ring radiator Vifa tweeter assures detailed and precise rendition of high frequencies. Precise second order crossover and internal wiring uses point to point technique and is directly soldered to the contacts on the transducers and terminals, eliminating the possibility of contact resistance of typical Faston connectors. Crossover parts are carefully selected, measured and matched. High quality terminals complete the package.

Wega 73 is primarily designed for a listener who prefers natural, analog sound. The music rendition is precise, uniform and dynamic. Great loudspeakers will play music well at any volume and Wega 73 certainly delivers here – it plays pianissimo and fortissimo with equal aplomb.

SPECIFICATIONS

• System: 2-way, bass-reflex, front-ported
• Tweeter: 1 x 1” Vifa ring radiator
• Midrange: 1 x 5” Scan-Speak carbon-fibre cone
• Woofer: 2 x 6.5” paper cone
• Impedance: 8 Ohm
• Power Handling: 100W / 200W peak
• Sensitivity: 89dB / 1W / 1m
• Frequency Response: 25Hz - 40kHz within 6dB
• Crossover Slope: 12.12 dB/oct
• Internal Cabling: Pro-Ject cable
• Dimensions (wxhxd): 190 x 1000 x 300mm
• Weight: 18kg
• Finishes: Black Ash, Walnut

DESCRIPTION

KEY FEATURES

INCLUDED ACCESSORIES

• RCA Interconnection Cables
• Laptop wired 24VAC / 500mA Power Supply
• Crystal methacrylate Dust Cover
• Owner Manual
• Cartridge Reference Template
• Anti-Skating Weight
• 3 x Arm's Balancing Weight
• Arm's Specific Tools

SPECIFICATIONS

DESCRIPTION

The Clef Audio Conductor-LP is a solid-state Phono-Stage Pre-amplifier capable of supporting both MM (Moving Magnet) and MC (Moving Coil) cartridges. It suits both Standard Output and Low Output cartridges without needing a Step-Up Transformer.

The Conductor-LP is designed to support two inputs simultaneously (MM + MC) by front panel selection. Output of the unit is via both Unbalanced (RCA) and Balanced (XLR) connectors.

Using "Low Noise High Gain Design Circuit" Technology, the Conductor-LP has one of the best RIAA equalisation curve with an accuracy better than 0.1 dB over 10 Octaves.

The Conductor-LP features gain adjustments between 40dB to 76dB, which can support both High Output MM cartridges and very Low Output MC cartridges.

Dual mono design topology resulting in minimising cross interference between the Left & Right channel, improve soundstage with greater depth, pinpoint musical instrument placements and vocal accuracy.

An external power supply for steady voltage and improved isolation.

SPECIFICATIONS

• GAIN  
• 42 dB @ 1 KHz (MM)
• 52 dB @ 1 KHz (MC)
• 62 dB @ 1 KHz (MC)
• 72 dB @ 1 KHz (MC)
• RIAA RESPONSE  +0.1 dB 20-20 KHz
• DISTORTION  < .05 % THD @ 20 volts balanced @ 1 KHz
• MAXIMUM OUTPUT  20 volts rms
• OUTPUT IMPEDANCE  150/150 ohms
• INPUT IMPEDANCE  
• 47K ohm 0-550 pF (MM)
• 33 ohm - 47K ohm (MC)
• UNWEIGHTED NOISE  
• -90 dB ref. 10 mV input (MM)
• -81 dB ref. 1 mV input (MC)
• POWER CONSUMPTION  32 Watts
• NUMBER OF CHASSIS  2
• DIMENSION (W x H x D) 
• Main Unit - 432 x 100 x 320 mm
• Supply Unit - 163 x 79 x 233 mm
• WEIGHT 
• Main Unit -  6.5 Kg / 8 Kg in shipping carton
• Supply Unit -  3 Kg / 3.3 Kg in shipping carton