Name: Revel F228Be Floorstanding Speakers
Brand: Revel
SKU: F228Be BLK
Price: 18995.0 AUD
Availability: InStock

Revel 10 dynamic drive powered subwoofer wh d10 - Audio Influence Australia

Revel 10 dynamic drive powered subwoofer wh d10 - Audio Influence Australia 2

Revel 10 dynamic drive powered subwoofer wh d10 - Audio Influence Australia 3

Revel 10 dynamic drive powered subwoofer wh d10 - Audio Influence Australia 4

Revel 10 dynamic drive powered subwoofer wh d10 - Audio Influence Australia 5

Revel

Revel F228Be Floorstanding Speakers

$18,995.00

DESCRIPTION

The Revel Performa F228Be is a powerful and elegant 3-way, dual 8-inch floorstanding loudspeaker that sets a new world standard in performance. Using the award-winning Performa3 F208 as the starting point, virtually every component was re-engineered to extract the finest details, the highest level of performance, and the most emotion possible. Featuring an all-new Beryllium tweeter, the F228Be delivers unparalleled detail and accuracy with an expansive and cohesive soundstage.

At the heart of the Revel Performa F228Be's immaculate sound lies a 1-inch beryllium tweeter driven by massive 85mm dual ceramic magnets. The powerful tweeter is mated to a 5th-generation ceramic-coated, cast-aluminum Acoustic Lens waveguide engineered to seamlessly integrate with the directivity of the companion midrange driver. The 5.25-inch midrange driver has been updated with a larger Deep Ceramic Composite (DCC) diaphragm, bigger voice coil and ceramic motor structure. The result is greater efficiency, less compression, improved dynamic range, reduced distortion, and increased power handling.

PerformaBe crossover networks utilize all film capacitors and air core inductors in the midrange and tweeter circuits. These premium components allow Revel's world-class engineers to extract nuances and details from music that would otherwise be lost. Combined with traditional Revel high-order crossover slopes and proprietary Acoustic Lens waveguide geometry, transducer integration is seamless.

FEATURES

1-inch Beryllium Dome Tweeter
High-order Crossovers with Film Capacitors and Air Core Inductors
5th-generation Acoustic Lens Waveguide
Magnetically Attached Grilles
DCC Cone Midrange and Woofers
4 Premium High-gloss Finishes Available

SPECIFICATIONS

Description: 3-way Dual 8" Floorstanding Loudspeakers
High-frequency Driver Components: 1" Beryllium dome with acoustic lens waveguide
Mid-frequency Driver Components: 5.25" DCC aluminum cone with cast frame
Low-frequency Driver Components: Dual 8" Deep Ceramic Composite (DCC) Aluminum Cones with cast frames
Frequency Response (-6dB): 27Hz - 44kHz
Recommended Amplifier Power: 50 - 350 Watts
Crossover Frequencies: 260Hz; 2.1kHz
Nominal Impedance:8 Ohms
Sensitivity: 90dB (2.83V @1M)
Finishes: High-gloss Black, White, Walnut and Metallic Silver
Dimensions (H x W x D): 1182.5mm x 341.8mm x 375.3mm
Net weight: 37.2kg

Free shipping Australia wide on all orders over $150.
$15 flat rate for all other orders.

30-day postage paid returns.

Revel f126be bookshelf speaker - Audio Influence Australia

Revel f126be bookshelf speaker - Audio Influence Australia 2

Revel f126be bookshelf speaker - Audio Influence Australia 3

Revel f126be bookshelf speaker - Audio Influence Australia 4

Revel f126be bookshelf speaker - Audio Influence Australia 5

Revel

Revel F126Be Bookshelf Speakers

$7,495.00

DESCRIPTION

At the heart of the Revel Performa M126Be's immaculate sound lies a 1-inch beryllium tweeter driven by massive 85mm dual ceramic magnets. The powerful tweeter and 5th-generation ceramic-coated, cast-aluminum Acoustic Lens waveguide seamlessly integrate with the directivity of the 6.5-inch Deep Ceramic Composite (DCC) aluminum cone woofer, yielding greater efficiency, less compression, improved dynamic range, reduced distortion, and increased power handling.

PerformaBe crossover networks utilize all film capacitors and air core inductors in the midrange and tweeter circuits. These premium components allow Revel's world-class engineers to extract nuances and details from music that would otherwise be lost. Combined with traditional Revel high-order crossover slopes and proprietary Acoustic Lens waveguide geometry, transducer integration is seamless.

THE BEAUTY OF BERYLLIUM Beryllium - Element 4 on the Periodic Table - is a rare earth metal that is renowned for its remarkable physical properties that make it the ideal material for a high-frequency transducer. Compared to aluminum and titanium tweeter diaphragms, Beryllium offers 4.5 times the stiffness and three times more damping, and does so at only half of the weight.

ELEGANT DESIGN M126Be top panels are painted in stylish metallic black with raised electroform badging. The speakers are available in a choice of four high-gloss finishes for seamless integration into any décor: Black, White, Walnut, and Metallic Silver.

FEATURES

1-inch Beryllium Dome Tweeter
High-order Crossovers with Film Capacitors and Air Core Inductors
5th-generation Acoustic Lens Waveguide
Magnetically Attached Grilles
DCC Cone Midrange and Woofers
4 Premium High-gloss Finishes Available

SPECIFICATIONS

Description: 2-way 6.5" Bookshelf speakers
High-frequency Driver Components: 1" Beryllium dome with acoustic lens waveguide
Low-frequency Driver Components: 6.5" Deep Ceramic Composite (DCC) Aluminum Cone with cast frame
Frequency Response (-6dB): 54Hz - 44kHz
Recommended Amplifier Power: 50 - 150 Watts
Crossover Frequencies: 1.7kHz
Nominal Impedance:8 Ohms
Sensitivity: 86dB (2.83V @1M)
Finishes: High-gloss Black, White, Walnut and Metallic Silver
Dimensions (H x W x D): 1182.5mm x 341.8mm x 375.3mm
Net weight: 9.97kg

Free shipping Australia wide on all orders over $150.
$15 flat rate for all other orders.

30-day postage paid returns.

Revel performa3 f208 floorstanding speakers - Audio Influence Australia

Revel performa3 f208 floorstanding speakers - Audio Influence Australia 2

Revel performa3 f208 floorstanding speakers - Audio Influence Australia 3

Revel

Revel Performa 3 F208 Floorstanding Speakers

$9,995.00

DESCRIPTION

Revel F208's low-frequency and midrange transducers feature distortion reduction mechanisms that stabilize the flux field during operation, assuring low distortion even at high listening volumes. These precision transducers utilize ribbed aluminum cones for ideal piston-like behavior that eliminates a major source of resonances that are clearly audible in most other loudspeakers. Their cast aluminum frames eliminate another source of resonances that is common in many lesser-quality loudspeakers.

These loudspeakers employ a sophisticated fluid-model designed low-frequency port with identical flares on both ends. This greatly minimizes dynamic compression and port-generated noise, assuring low-distortion low-frequency performance. The front-firing port location expands the speakers’ installation options.

The F208 tweeter has been created around a newly-designed motor and dome assembly that sets a new standard of transparency for speakers anywhere near the Performa3’s class. The tweeter’s integrated acoustic lens waveguide is based on a breakthrough mathematical approach that accurately matches the tweeter’s dispersion to that of the midrange transducer in the crossover region.

This gives the loudspeaker very smooth sound far off-axis – an important contributor to overall sound quality, providing consistent sound over an exceptionally wide listening area. In fact, this new waveguide actually increases the tweeter’s dispersion at higher frequencies.

The F208 is housed in enclosures that are similar to our flagship Ultima2 Series. These fully-curved enclosures are inherently stiffer than conventional box shapes and are formed with contiguous wood layers that prevent splitting. They feature strategically-oriented bracing that eliminates the possibility of enclosure-induced colouration.

These beautiful, modern enclosures are finished in high-gloss piano black or genuine American walnut in a process (developed and overseen by Italian luxury cabinet makers) that exceeds automotive finish quality.

The loudspeaker grilles are designed to minimize sonic diffraction or veiling and provide a clean, subtle appearance. The magnetic grille attachment method completely eliminates ugly hardware on the loudspeaker baffle, so if you decide to use the loudspeakers without grilles they will look like they were designed to be used without grilles.

To learn more about the F208 floorstanding loudspeakers, please read the Owner's Manual located in the downloads section.

FEATURES

Transducers feature motor-system distortion-reduction mechanisms that stabilize the flux field during operation
Ribbed aluminum cones achieve piston like behavior eliminating major sources of resonance
New waveguides provide consistent sound over a wide listening area
Enclosures created by Italian luxury cabinetmakers
Fluid-model port designs keep distortion low
Advanced crossovers optimize timbre accuracy both on axis and throughout the room

SPECIFICATIONS

Description: 3-way Dual 8" Floorstanding Loudspeakers
High-frequency Driver Components: 1” (2.5 cm) Aluminum Tweeter with Acoustic Lens Waveguide
Mid-frequency Driver Components: 5.25” (13.3 cm) Aluminum Cone, Cast-frame Midrange
Low-frequency Driver Components: Dual 8” (20 cm) Aluminum Cone, Cast-frame Woofers
Low Frequency Extension: -10dB@23Hz, -6dB@27 Hz, -3dB@31Hz
Recommended Amplifier Power: 50 - 350 Watts
Crossover Frequencies: 270 Hz, 2200 Hz
Nominal Impedance: 8 Ohms
Sensitivity: 89dB
Enclosure Type: Bass-reflex via Front-firing Port
Finishes: High-gloss Black, Walnut
Dimensions (H x W x D): 1182.5mm x 341.8mm x 375.3mm
Net weight: 36kg

Free shipping Australia wide on all orders over $150.
$15 flat rate for all other orders.

30-day postage paid returns.

Revel performa3 f206 floorstanding speakers - Audio Influence Australia

Revel performa3 f206 floorstanding speakers - Audio Influence Australia 2

Revel performa3 f206 floorstanding speakers - Audio Influence Australia 3

Revel performa3 f206 floorstanding speakers - Audio Influence Australia 4

Revel

Revel Performa 3 F206 Floorstanding Speakers

$6,795.00

DESCRIPTION

Revel Performa3 floorstanding loudspeakers are true full-range loudspeakers that feature small footprints and sleek designs, allowing them to blend-in easily with your existing décor. They deliver an impressive combination of wide frequency range, uncompressed dynamic range and low distortion across the entire audible spectrum.

Revel F206's low-frequency and midrange transducers feature distortion reduction mechanisms that stabilize the flux field during operation, assuring low distortion even at high listening volumes. These precision transducers utilize ribbed aluminum cones for ideal piston-like behavior that eliminates a major source of resonances that are clearly audible in most other loudspeakers. Their cast aluminum frames eliminate another source of resonances that is common in many lesser-quality loudspeakers.

These loudspeakers employ a sophisticated fluid-model designed low-frequency port with identical flares on both ends. This greatly minimizes dynamic compression and port-generated noise, assuring low-distortion low-frequency performance. The front-firing port location expands the speakers’ installation options.

The F208 and F206 tweeter has been created around a newly-designed motor and dome assembly that sets a new standard of transparency for speakers anywhere near the Performa3’s class. The tweeter’s integrated acoustic lens waveguide is based on a breakthrough mathematical approach that accurately matches the tweeter’s dispersion to that of the midrange transducer in the crossover region. This gives the loudspeaker very smooth sound far off-axis – an important contributor to overall sound quality, providing consistent sound over an exceptionally wide listening area. In fact, this new waveguide actually increases the tweeter’s dispersion at higher frequencies.

The F206 is housed in enclosures that are similar to our flagship Ultima2 Series. These fully-curved enclosures are inherently stiffer than conventional box shapes and are formed with contiguous wood layers that prevent splitting. They feature strategically-oriented bracing that eliminates the possibility of enclosure-induced colouration. These beautiful, modern enclosures are finished in high-gloss piano black or genuine American walnut in a process (developed and overseen by Italian luxury cabinet makers) that exceeds automotive finish quality.

The loudspeaker grilles are designed to minimize sonic diffraction or veiling and provide a clean, subtle appearance. The magnetic grille attachment method completely eliminates ugly hardware on the loudspeaker baffle, so if you decide to use the loudspeakers without grilles they will look like they were designed to be used without grilles. To learn more about the F208 and F206 floorstanding loudspeakers, please read the Owner's Manual located in the downloads section.

FEATURES

Transducers feature motor-system distortion-reduction mechanisms that stabilize the flux field during operation
Ribbed aluminum cones achieve piston like behavior eliminating major sources of resonance
New waveguides provide consistent sound over a wide listening area
Enclosures created by Italian luxury cabinetmakers
Fluid-model port designs keep distortion low
Advanced crossovers optimize timbre accuracy both on axis and throughout the room

SPECIFICATIONS

Description: 3-way Dual 6.5" Floorstanding Loudspeaker
High-frequency Driver Components: 1” (2.5 cm) Aluminum Tweeter with Acoustic Lens Waveguide
Mid-frequency Driver Components: 5.25” (13.3 cm) Aluminum Cone, Cast-frame Midrange
Low-frequency Driver Components: Dual 6.5” (16.5 cm) Aluminum Cone, Cast-frame Woofers
Low Frequency Extension: -10dB@30Hz -6dB@36Hz -3dB@42Hz
Recommended Amplifier Power: 50 - 200 Watts
Crossover Frequencies: 275 Hz, 2150 Hz
Nominal Impedance: 8 Ohms
Sensitivity: 88dB
Enclosure Type: Bass-reflex via Front-firing Port
Finishes: Piano Black, Piano White, or High Gloss Walnut
Dimensions (H x W x D): 1052mm x 249mm x 347mm
Net weight: 26kg

Free shipping Australia wide on all orders over $150.
$15 flat rate for all other orders.

30-day postage paid returns.

Revel performa 3 m106 bookshelf speaker - Audio Influence Australia

Revel performa 3 m106 bookshelf speaker - Audio Influence Australia 2

Revel

Revel Performa 3 M106 Bookshelf Speakers

$3,495.00

DESCRIPTION

Revel Performa3 bookshelf loudspeakers are true full-range loudspeakers that feature small footprints and sleek designs, allowing them to blend-in easily with your existing décor. They deliver an impressive combination of wide frequency range, uncompressed dynamic range and low distortion across the entire audible spectrum.

Revel M106 low-frequency transducers feature distortion reduction mechanisms that stabilize the flux field during operation, assuring low distortion even at high listening volumes. These precision transducers utilize ribbed aluminum cones for ideal piston-like behavior that eliminates a major source of resonances that are clearly audible in most other loudspeakers.

Their cast aluminum frames eliminate another source of resonances that is common in many lesser-quality loudspeakers. These loudspeakers employ a sophisticated fluid-model designed low-frequency port with identical flares on both ends. This greatly minimizes dynamic compression and port-generated noise, assuring low-distortion low-frequency performance.

The M106's tweeter has been created around a newly designed motor and dome assembly that sets a new standard of transparency for speakers anywhere near the Performa3’s class. The tweeter’s integrated acoustic lens waveguide is based on a breakthrough mathematical approach that accurately matches the tweeter’s dispersion to that of the low-frequency transducer in the crossover region.

This gives the loudspeaker very smooth sound far off-axis – an important contributor to overall sound quality, providing consistent sound over an exceptionally wide listening area. In fact, this new waveguide actually increases the tweeter’s dispersion at higher frequencies.

The M106 is housed in enclosures that are similar to our flagship Ultima2 Series. These fully-curved enclosures are inherently stiffer than conventional box shapes and are formed with contiguous wood layers that prevent splitting. They feature strategically-oriented bracing that eliminates the possibility of enclosure-induced colouration. These beautiful, modern enclosures are finished in high-gloss piano black, high-gloss piano white or genuine American walnut in a process (developed and overseen by Italian luxury cabinet makers) that exceeds automotive finish quality.

The loudspeaker grilles are designed to minimize sonic diffraction or veiling and provide a clean, subtle appearance. The magnetic grille attachment method completely eliminates ugly hardware on the loudspeaker baffle, so if you decide to use the loudspeakers without grilles they will look like they were designed to be used without grilles.

FEATURES

Transducers feature motor-system distortion-reduction mechanisms that stabilize the flux field during operation
Ribbed aluminum cones achieve piston like behavior eliminating major sources of resonance
New waveguides provide consistent sound over a wide listening area
Enclosures created by Italian luxury cabinetmakers
Fluid-model port designs keep distortion low
Advanced crossovers optimize timbre accuracy both on axis and throughout the room

SPECIFICATIONS

Description: 2-way 6.5" Bookshelf speakers
High-frequency Driver Components: 1” (2.5 cm) Aluminum Tweeter with Acoustic Lens Waveguide
Low-frequency Driver Components: 6.5” (16.5 cm) Aluminum Cone, Cast-frame Woofer
Low Frequency Extension: 10dB@39Hz -6dB@54Hz -3dB@59Hz
Recommended Amplifier Power: 50 - 150 Watts
Crossover Frequencies: 2.3kHz
Nominal Impedance:8 Ohms
Sensitivity: 87dB
Finishes: Piano Black, High Gloss Walnut
Dimensions (H x W x D): 356 mm x 200 mm x 248 mm
Net weight: 8kg

Free shipping Australia wide on all orders over $150.
$15 flat rate for all other orders.

30-day postage paid returns.

Revel performa 3 m105 bookshelf speaker - Audio Influence Australia

Revel performa 3 m105 bookshelf speaker - Audio Influence Australia 2

Revel performa 3 m105 bookshelf speaker - Audio Influence Australia 3

Revel

Revel Performa 3 M105 Bookshelf Speakers

$2,695.00

DESCRIPTION

Revel Performa3 bookshelf loudspeakers are true full-range loudspeakers that feature small footprints and sleek designs, allowing them to blend-in easily with your existing décor. They deliver an impressive combination of wide frequency range, uncompressed dynamic range and low distortion across the entire audible spectrum.

Revel M105 low-frequency transducers feature distortion reduction mechanisms that stabilize the flux field during operation, assuring low distortion even at high listening volumes. These precision transducers utilize ribbed aluminum cones for ideal piston-like behavior that eliminates a major source of resonances that are clearly audible in most other loudspeakers.

Their cast aluminum frames eliminate another source of resonances that is common in many lesser-quality loudspeakers. These loudspeakers employ a sophisticated fluid-model designed low-frequency port with identical flares on both ends. This greatly minimizes dynamic compression and port-generated noise, assuring low-distortion low-frequency performance.

The M105 is tweeter has been created around a newly designed motor and dome assembly that sets a new standard of transparency for speakers anywhere near the Performa3’s class. The tweeter’s integrated acoustic lens waveguide is based on a breakthrough mathematical approach that accurately matches the tweeter’s dispersion to that of the low-frequency transducer in the crossover region.

This gives the loudspeaker very smooth sound far off-axis – an important contributor to overall sound quality, providing consistent sound over an exceptionally wide listening area. In fact, this new waveguide actually increases the tweeter’s dispersion at higher frequencies.

The M105 is housed in enclosures that are similar to our flagship Ultima2 Series. These fully-curved enclosures are inherently stiffer than conventional box shapes and are formed with contiguous wood layers that prevent splitting. They feature strategically-oriented bracing that eliminates the possibility of enclosure-induced colouration. These beautiful, modern enclosures are finished in high-gloss piano black, high-gloss piano white or genuine American walnut in a process (developed and overseen by Italian luxury cabinet makers) that exceeds automotive finish quality.

The loudspeaker grilles are designed to minimize sonic diffraction or veiling and provide a clean, subtle appearance. The magnetic grille attachment method completely eliminates ugly hardware on the loudspeaker baffle, so if you decide to use the loudspeakers without grilles they will look like they were designed to be used without grilles.

FEATURES

Transducers feature motor-system distortion-reduction mechanisms that stabilize the flux field during operation
Ribbed aluminum cones achieve piston like behavior eliminating major sources of resonance
New waveguides provide consistent sound over a wide listening area
Enclosures created by Italian luxury cabinetmakers
Fluid-model port designs keep distortion low
Advanced crossovers optimize timbre accuracy both on axis and throughout the room

SPECIFICATIONS

Description: 2-way 5.25" Bookshelf speakers
High-frequency Driver Components: 1” (2.5 cm) Aluminum Tweeter with Acoustic Lens Waveguide
Low-frequency Driver Components: 5.25” (13.3 cm) Aluminum Cone, Cast-frame Woofer
Low Frequency Extension: -10dB@44Hz -6dB@56Hz -3dB@60Hz
Recommended Amplifier Power: 50 - 120 Watts
Crossover Frequencies: 2.3kHz
Nominal Impedance: 8 Ohms
Sensitivity: 86dB
Finishes: Piano Black, Piano White, High Gloss Walnut
Dimensions (H x W x D): 356 mm x 200 mm x 248 mm
Net weight: 7kg

Free shipping Australia wide on all orders over $150.
$15 flat rate for all other orders.

30-day postage paid returns.

Revel performa 3 c208 centre speaker - Audio Influence Australia

Revel performa 3 c208 centre speaker - Audio Influence Australia 2

Revel performa 3 c208 centre speaker - Audio Influence Australia 3

Revel

Revel Performa 3 C208 Centre Speaker

$3,495.00

DESCRIPTION

Revel C208 low-frequency transducers and midrange transducer feature distortion reduction mechanisms that stabilize the flux field during operation, assuring low distortion even at high listening volumes. These precision transducers utilize ribbed aluminum cones for ideal piston-like behavior that eliminates a major source of resonances that are clearly audible in most other loudspeakers. Their cast aluminum frames eliminate another source of resonances that is common in many lesser-quality loudspeakers.

The C208 tweeter has been created around a newly-designed motor and dome assembly that sets a new standard of transparency for the Performa3 category. The tweeter’s integrated acoustic lens waveguide is based on a breakthrough mathematical approach that accurately matches the tweeter’s dispersion to that of the midrange transducer in the crossover region. This gives the loudspeaker very smooth sound far off-axis – an important contributor to overall sound quality, providing consistent sound over an exceptionally wide listening area. In fact, this new waveguide actually increases the tweeter’s dispersion at higher frequencies.

The C208 are housed in enclosures that are similar to our flagship Ultima2 Series. These fully-curved enclosures feature sleek curved tops and bottoms, which are inherently stiffer than conventional box shapes and are formed with contiguous wood layers that prevent splitting. They feature strategically-oriented bracing that eliminates the possibility of enclosure-induced colouration. These beautiful, modern enclosures are finished in high-gloss piano black, or genuine American walnut in a process (developed and overseen by Italian luxury cabinet makers) that exceeds automotive finish quality.

The loudspeaker grilles are designed to minimize sonic diffraction or veiling and provide a clean, subtle appearance. The magnetic grille attachment method completely eliminates ugly hardware on the loudspeaker baffle, so if you decide to use the loudspeakers without grilles they will look like they were designed to be used without grilles.

FEATURES

Transducers feature motor-system distortion-reduction mechanisms that stabilize the flux field during operation
Ribbed aluminum cones achieve piston like behavior eliminating major sources of resonance
New waveguides provide consistent sound over a wide listening area
Enclosures created by Italian luxury cabinetmakers
Fluid-model port designs keep distortion low
Advanced crossovers optimize timbre accuracy both on axis and throughout the room

SPECIFICATIONS

Description: 3-way dual 8" Centre speaker
High-frequency Driver Components: 1” (2.5 cm) Aluminum Tweeter with Acoustic Lens Waveguide
Mid-frequency Driver Components: 4" (10 cm) Aluminum Cone, Cast-frame Midrange
Low-frequency Driver Components: Dual 8” (20 cm) Aluminum Cone, Cast-frame Woofers
Low Frequency Extension: -10dB@34Hz -6dB@41Hz -3dB@50Hz
Recommended Amplifier Power: 50 - 350 Watts
Crossover Frequencies: 375 Hz, 2450 kHz
Nominal Impedance: 8 Ohms
Sensitivity: 89dB
Finishes: Piano Black, High Gloss Walnut
Dimensions (H x W x D): 300 mm x 735 mm x 350 mm
Net weight: 23kg

Free shipping Australia wide on all orders over $150.
$15 flat rate for all other orders.

30-day postage paid returns.

Revel performa 3 c205 centre speaker - Audio Influence Australia

Revel performa 3 c205 centre speaker - Audio Influence Australia 2

Revel performa 3 c205 centre speaker - Audio Influence Australia 3

Revel performa 3 c205 centre speaker - Audio Influence Australia 4

Revel performa 3 c205 centre speaker - Audio Influence Australia 5

Revel

Revel Performa 3 C205 Centre Speaker

$1,895.00

DESCRIPTION

Revel C205 low-frequency transducers and midrange transducer feature distortion reduction mechanisms that stabilize the flux field during operation, assuring low distortion even at high listening volumes.

These precision transducers utilize ribbed aluminum cones for ideal piston-like behavior that eliminates a major source of resonances that are clearly audible in most other loudspeakers. Their cast aluminum frames eliminate another source of resonances that is common in many lesser-quality loudspeakers.

The C205 tweeter has been created around a newly-designed motor and dome assembly that sets a new standard of transparency for the Performa3 category. The tweeter’s integrated acoustic lens waveguide is based on a breakthrough mathematical approach that accurately matches the tweeter’s dispersion to that of the midrange transducer in the crossover region.

This gives the loudspeaker very smooth sound far off-axis – an important contributor to overall sound quality, providing consistent sound over an exceptionally wide listening area. In fact, this new waveguide actually increases the tweeter’s dispersion at higher frequencies.

The C205 are housed in enclosures that are similar to our flagship Ultima2 Series. These fully-curved enclosures feature sleek curved tops and bottoms, which are inherently stiffer than conventional box shapes and are formed with contiguous wood layers that prevent splitting. They feature strategically-oriented bracing that eliminates the possibility of enclosure-induced colouration.

These beautiful, modern enclosures are finished in high-gloss piano black, high-gloss piano white or genuine American walnut in a process (developed and overseen by Italian luxury cabinet makers) that exceeds automotive finish quality.

The loudspeaker grilles are designed to minimize sonic diffraction or veiling and provide a clean, subtle appearance. The magnetic grille attachment method completely eliminates ugly hardware on the loudspeaker baffle, so if you decide to use the loudspeakers without grilles they will look like they were designed to be used without grilles.

FEATURES

Transducers feature motor-system distortion-reduction mechanisms that stabilize the flux field during operation
Ribbed aluminum cones achieve piston like behavior eliminating major sources of resonance
New waveguides provide consistent sound over a wide listening area
Enclosures created by Italian luxury cabinetmakers
Fluid-model port designs keep distortion low
Advanced crossovers optimize timbre accuracy both on axis and throughout the room

SPECIFICATIONS

Description: 2-way 5.25" Centre speaker
High-frequency Driver Components: 1” (2.5 cm) Aluminum Tweeter with Acoustic Lens Waveguide
Low-frequency Driver Components: Dual 5.25” (13.3 cm) Aluminum Cone, Cast-frame Woofers
Low Frequency Extension: -10dB@46Hz -6dB@62Hz -3dB@80Hz
Recommended Amplifier Power: 50 - 120 Watts
Crossover Frequencies: 1.7 kHz
Nominal Impedance: 8 Ohms
Sensitivity: 89dB
Finishes: Piano Black, Piano White, High Gloss Walnut
Dimensions (H x W x D): 200 mm x 532 mm x 292 mm
Net weight: 12kg

Free shipping Australia wide on all orders over $150.
$15 flat rate for all other orders.

30-day postage paid returns.

Revel performa 3 s206 surround speakers - Audio Influence Australia

Revel performa 3 s206 surround speakers - Audio Influence Australia 2

Revel performa 3 s206 surround speakers - Audio Influence Australia 3

Revel

Revel Performa 3 S206 Surround Speaker

$1,599.00

DESCRIPTION

The speaker’s two sets of transducers operate in a bi-polar configuration, which maximizes the speaker’s timbre match with that of other Revel Performa3 speakers and further integrates the entire system’s sound into a spacious, enveloping surround-sound environment.

The S206 tweeters feature an integrated acoustic lens waveguide that is based on a breakthrough mathematical approach that accurately matches the tweeters’ dispersion to that of the low-frequency transducers in the crossover region. This gives the loudspeaker very smooth sound far off-axis – an important contributor to overall sound quality, providing consistent sound over an exceptionally wide listening area.

In fact, this new waveguide actually increases the tweeter’s dispersion at higher frequencies. The S206 enclosure features strategically-oriented bracing that eliminates the possibility of enclosure-induced colouration.

FEATURES

Transducers feature motor-system distortion-reduction mechanisms that stabilize the flux field during operation
Ribbed aluminum cones achieve piston like behavior eliminating major sources of resonance
New waveguides provide consistent sound over a wide listening area
Enclosures created by Italian luxury cabinetmakers
Fluid-model port designs keep distortion low
Advanced crossovers optimize timbre accuracy both on axis and throughout the room

SPECIFICATIONS

Description: 2-way dual 6.5" bipole Surround speaker
High-frequency Driver Components: 1” (2.5 cm) Aluminum Tweeter with Acoustic Lens Waveguide
Low-frequency Driver Components: Dual 6.5” (16.5 cm) Aluminum Cone, Cast-frame Woofers
Low Frequency Extension: 10dB@52Hz -6dB@58Hz -3dB@65Hz
Recommended Amplifier Power: 50 - 150 Watts
Crossover Frequencies: 1.4 kHz
Nominal Impedance: 8 Ohms
Sensitivity: 89dB
Finishes: Matte Black
Dimensions (H x W x D): 343 mm x 400 mm x 216 mm
Net weight: 7kg

Free shipping Australia wide on all orders over $150.
$15 flat rate for all other orders.

30-day postage paid returns.

Revel performa 3 s206 subwoofer - Audio Influence Australia

Revel performa 3 s206 subwoofer - Audio Influence Australia 2

Revel performa 3 s206 subwoofer - Audio Influence Australia 3

Revel performa 3 s206 subwoofer - Audio Influence Australia 4

Revel

Revel Performa 3 B112 Subwoofer

$5,295.00

DESCRIPTION

Revel B112 12 Inch Powered Subwoofer delivers massive 1000 Watts of deep impactful Low Frequencies to your home theatre and features extremely long two-layer copper voice Coil, High-Temperature nomex spider, nitril/butylene rubber surround triple-stacked vented ceramic magnet in transducers magnet assembly and thick top plate for effective heat and flux distribution for lower distortion.

FEATURES

Extremely long two-layer copper voice coil gives the transducer a very high Xmax which dramatically increases output
High-temperature nomex spider features a progressive roll design that even distributes mechanical stress
A nitri/butylene rubber surround uses patented Plus One® technology increasing the volume displacement and output
Vented cellulose/pulp cone aids in the exchange of air to reduce acoustic losses and increase output
Cast aluminium frame is fully vented to minimise acoustic losses caused by excessive back pressure
Line-level XLR and RCA In/Out

SPECIFICATIONS

Driver Components: 12" Coated paper/pulp cone with 50mm two-layer copper voice coil, vented ceramic 5 magnet assembly and vented die-cast aluminum frame
Amplifier Power: 1000W RMS
Crossover Frequencies: 50Hz - 150Hz low-pass filter with LFE bypass
Input Sensitivity: 400mV (full power)/20k Ohms (balanced); 14k Ohms (unbalanced)
Enclosure Type: Sealed
Finishes: Piano Black, High Gloss Walnut
Dimensions (H x W x D): 411 mm x 362 mm x 342.4 mm
Net weight: 25kg

Free shipping Australia wide on all orders over $150.
$15 flat rate for all other orders.

30-day postage paid returns.

Revel performa 3 b110 subwoofer - Audio Influence Australia

Revel performa 3 b110 subwoofer - Audio Influence Australia 2

Revel performa 3 b110 subwoofer - Audio Influence Australia 3

Revel performa 3 b110 subwoofer - Audio Influence Australia 4

Revel

Revel Performa 3 B110 Subwoofer

$4,495.00

DESCRIPTION

Revel Performa 3 B110 10 Inch Powered Subwoofer delivers powerful low-frequencies with up to 1000 Watts of power and smooth response.

The extremely long (50mm) two-layer copper voice coil gives this transducer a very high Xmax, dramatically increasing output. A fiberglass voice coil former helps the voice coil withstand high temperatures, reducing power compression and helping increase output. A cardboard spacer added at the top of the voice coil former maintains motor geometry, creates a solid attachment joint and prevents deformation of the voice coil at high outputs. The spacer also eliminates the typical single fulcrum point between the spider and cone on the voice coil former, minimizing voice coil rocking modes during hi-power operation.

FEATURES

Extremely long two-layer copper voice coil gives the transducer a very high Xmax which dramatically increases output
High-temperature nomex spider features a progressive roll design that even distributes mechanical stress
A nitri/butylene rubber surround uses patented Plus One® technology increasing the volume displacement and output
Vented cellulose/pulp cone aids in the exchange of air to reduce acoustic losses and increase output
Cast aluminium frame is fully vented to minimise acoustic losses caused by excessive back pressure

SPECIFICATIONS

Driver Components: 10" Coated paper/pulp cone with 50mm two-layer copper voice coil, vented ceramic 5 magnet assembly and vented die-cast aluminum frame
Amplifier Power: 1000W RMS
Crossover Frequencies: 50Hz - 150Hz low-pass filter with LFE bypass
Input Sensitivity: 400mV (full power)/20k Ohms (balanced); 14k Ohms (unbalanced)
Enclosure Type: Sealed
Finishes: Piano Black, High Gloss Walnut
Dimensions (H x W x D): 411 x 362 x 342.4 mm
Net weight: 25kg

Free shipping Australia wide on all orders over $150.
$15 flat rate for all other orders.

30-day postage paid returns.

Revel m stands for m105 m106 - Audio Influence Australia

Revel m stands for m105 m106 - Audio Influence Australia 2

Revel

Revel M Stands for M105 & M106

$799.00

DESCRIPTION

Revel M Stands Pair for M105 & M106 Speakers brings listening source to ear level for suitable surround sound configuration.

FEATURES

M106 and M105 speakers attach directly to the platforms on these stands with supplied mounting screws
stands may be used with other brands of bookshelf speakers that weigh up to 20 lbs. each (but they will not secure with mounting screws)
sturdy MDF construction for the upright posts, top plates, and bases
an integrated velcro-strap on the back of each stand helps you neatly route your wire to your speakers
includes feet with carpet spikes on one end and rounded ends for hardwood and tile floors on the other

Free shipping Australia wide on all orders over $150.
$15 flat rate for all other orders.

30-day postage paid returns.

Revel c stand for c205 c208 - Audio Influence Australia

Revel c stand for c205 c208 - Audio Influence Australia 2

Revel

Revel C Stand for C205 & C208

$549.00

DESCRIPTION

Revel C Stand for C205 & C208 Speaker. This matching pedestal stand raises the speaker and angles it slightly upward to help it blend in with your front left and right pair. The speaker secures to the stand with four screws.

FEATURES

speaker secures to the stand with four screws
can also be used with other center channel speakers weighing up to 51.5 lbs. (but will not secure with mounting screws)
upright front post of the stand is hollow to allow wire management
includes four feet with carpet spikes on one end and rounded ends for hardwood and tile floors on the other

Free shipping Australia wide on all orders over $150.
$15 flat rate for all other orders.

30-day postage paid returns.

Revel concerta m10 on wall speakers - Audio Influence Australia

Revel concerta m10 on wall speakers - Audio Influence Australia 2

Revel concerta m10 on wall speakers - Audio Influence Australia 3

Revel

Revel Concerta M10 On Wall Speaker

$999.00

DESCRIPTION

The Revel® Concerta™ M10 speaker continues the longstanding Revel commitment to accurate sound reproduction. The proprietary transducers utilizing Micro Ceramic Composite (MCC) diaphragms, precision dividing networks, sophisticated high-frequency waveguides and rigid enclosures all combine to deliver uncompromising performance in any stereo or multichannel home theater system. In addition, these speakers are magnetically shielded for safe placement near a CRT television.

As the left and right speakers in a music system, or perfectly matched to the Concerta C10 in a home theater system, the M10 delivers superb music reproduction and realistic, all encompassing movie sound to rooms of virtually any size.

FEATURES

Rigid aluminum enclosure
Micro Ceramic Composite (MCC) Cone Woofers
1'' Tweeter
Wall brackets
Three different bases included
Option STANDM10 loudspeaker stand

SPECIFICATIONS

High-frequency Driver Components: 1" (2.5 cm) micro-ceramic composite (MCC) cone tweeter
Mid-frequency Driver Components: Dual 3" (7.5 cm) micro-ceramic composite (MCC) cone midranges
Low-frequency Driver Components: Dual 3" (7.5 cm) micro-ceramic composite (MCC) cone woofers
Frequency Response: 110 Hz - 21 kHz
Recommended Amplifier Power: 50 - 150 Watts
Crossover Frequencies: 2-1/2-Way at 400Hz and 2.2kHz
Nominal Impedance:8 Ohms
Sensitivity: 89dB
Finishes: Black aluminum finish
Dimensions (H x W x D): 582 mm x 107 mm x 113 mm
Net weight: 3.5kg

Free shipping Australia wide on all orders over $150.
$15 flat rate for all other orders.

30-day postage paid returns.

Revel

Revel Concerta C10 Centre Speaker

$849.00

DESCRIPTION

The Revel® Concerta™ C10 center channel speaker is designed to perfectly complement the M10 and M8 satellite loudspeakers. It uses identical drivers to provide exceptional dialogue reproduction and a seamless transition between the front channels.The horizontal design allows for maximum placement flexibility

All Concerta on-wall woofer, midrange and tweeter diaphragms are constructed of Micro Ceramic Composite (MCC), a new material created by anodizing both sides of an aluminum core. Anodizing both sides of an aluminum core adds strength and stiffness – but very little weight – to a material already well suited for use in transducer diaphragms.

FEATURES

Rigid aluminum enclosure
Micro Ceramic Composite (MCC) Cone Woofers
1'' Tweeter
Wall brackets

SPECIFICATIONS

High-frequency Driver Components: 1" (25mm) tweeter with waveguide and Micro Ceramic Composite (MCC) dome
Mid-frequency Driver Components: Dual 3" (76mm) midrange transducers with Micro Ceramic Composite (MCC) cones
Low-frequency Driver Components: Dual 3" (76mm) woofers with Micro Ceramic Composite (MCC) cones
Frequency Response: (±3dB) 110Hz – 21kHz
Recommended Amplifier Power: 50 - 150 Watts
Crossover Frequencies: 2–1/2-Way high-order at 400Hz and 2.2kHz
Nominal Impedance:8 Ohms
Sensitivity: 89dB
Finishes: Piano black
Dimensions (H x W x D): 107 mm x 582 mm x 113 mm
Net weight: 3.1kg

Free shipping Australia wide on all orders over $150.
$15 flat rate for all other orders.

30-day postage paid returns.

concerta m8 on wall speaker - Audio Influence Australia

concerta m8 on wall speaker - Audio Influence Australia 2

concerta m8 on wall speaker - Audio Influence Australia 3

Revel

Revel Concerta M8 On Wall Speaker

$399.00

DESCRIPTION

Concerta speakers are voice-matched for use in any combination to build movie and music systems of uncommon realism. The series includes an innovative 3-channel LCR system mounted in a single enclosure, a highly capable center channel speaker, a choice of satellites and an impressive 250-watt powered subwoofer. The B120 sub can be connected directly to your system or operated wirelessly with an optional transmitter, for complete placement freedom.

The M8 is ideal as an inconspicuous surround loudspeaker or front-channel loudspeaker, whether wall-mounted or placed on a shelf. Voice-matched for use in any combination, Concerta speakers build movie and music systems of uncommon realism.

FEATURES

Rigid aluminum enclosure
Micro Ceramic Composite (MCC) Cone Woofers
1'' Tweeter
Wall brackets

SPECIFICATIONS

High-frequency Driver Components: 1" (2.5 cm) micro-ceramic composite (MCC) dome tweeter
Low-frequency Driver Components: Dual 3" (7.5 cm) micro-ceramic composite (MCC) cone woofers
Frequency Response: 110 Hz - 21 kHz
Recommended Amplifier Power: 50 - 150 Watts
Crossover Frequencies: 2-Way at 2.2kHz
Nominal Impedance:8 Ohms
Sensitivity: 89dB
Finishes: Black aluminum finish
Dimensions (H x W x D): 296mm x 107mm x 113mm
Net weight: 1.6kg

Free shipping Australia wide on all orders over $150.
$15 flat rate for all other orders.

30-day postage paid returns.

Revel concerta b1 subwoofer - Audio Influence Australia

Revel concerta b1 subwoofer - Audio Influence Australia 2

Revel concerta b1 subwoofer - Audio Influence Australia 3

Revel

Revel Concerta B1 Subwoofer

$1,595.00

DESCRIPTION

The Revel B1 is a high-performance powered subwoofer, designed to add essential bass response to any music or home theater system. The B1 subwoofer delivers accurate and authoritative bass from a surprisingly compact enclosure. Adjustable controls, parametric room equalization and multiple connection options provide unequalled placement flexibility and allow you to optimize low-frequency performance for any listening environment.

Featuring a 12" (305mm) woofer with 1-1/2" (38.1mm) peak-to-peak excursion and powered by a 250-watt amplifier, the B1 subwoofer reproduces deep, realistic bass with very low distortion, even at the lowest frequencies and high output levels

FEATURES

Woofer composed of micro ceramic composite (MCC) allows for strength and stiffness but very little weight
Nomex/cotton blend spider for increased linearity
2” (51mm)-diameter copper voice coil would on a Kapton bobbin for impressive power handling
Parametric room EQ functions
Downward-firing port allows for placement against a wall or cabinet

SPECIFICATIONS

Amplifier Power: 300W RMS
Crossover Frequencies: Low pass 50Hz – 150Hz, 24dB/octave, continuously variable
Maximum Output Levels: 20Hz – 150Hz with no more than 0.1% THD, 250W, RMS, 300W dynamic
Enclosure Type: Sealed
Finishes: Black
Dimensions (H x W x D): 450 mm x 400 mm x 336.5 mm (with grille) 304.8 mm (without grille) including feet
Net weight: 23.2kg

Free shipping Australia wide on all orders over $150.
$15 flat rate for all other orders.

30-day postage paid returns.

Revel concerta lcr8 on wall speaker - Audio Influence Australia

Revel concerta lcr8 on wall speaker - Audio Influence Australia 2

Revel concerta lcr8 on wall speaker - Audio Influence Australia 3

Revel concerta lcr8 on wall speaker - Audio Influence Australia 4

Revel

Revel Concerta LCR8 On Wall Speaker

$1,295.00

DESCRIPTION

The performance of Revel Concerta™ on-wall loudspeakers has been extensively evaluated in a variety of on-and near-wall installations through blind listening tests in the Revel Multichannel Listening Lab. Using proprietary 36-point anechoic measurements, Concerta on-wall speakers have been shown to deliver remarkably flat frequency response across an exceptionally wide listening area for clean, accurate sound in real-world listening rooms.

The LCR8 simplifies the look of a multichannel theater system by doing the work of three front speakers. It delivers left, right, and center channel signals with the clean dialogue and distinct imaging you would expect from separate components.

FEATURES

Rigid aluminum enclosure
Micro Ceramic Composite (MCC) Cone Woofers
1'' Tweeter with advanced waveguide and MCC dome

SPECIFICATIONS

High-frequency Driver Components: Three 1" (2.5 cm) micro-ceramic composite (MCC) cone tweeters
Low-frequency Driver Components: Six 3" (7.5 cm) micro-ceramic composite (MCC) Cone Woofers
Frequency Response: 110 Hz - 21 kHz
Recommended Amplifier Power: 125 Watts per channel
Crossover Frequencies: 2.2kHz
Nominal Impedance:8 Ohms
Sensitivity: 89dB
Finishes: Black aluminum finish
Dimensions (H x W x D): 107 mm x 1015 mm x 113 mm
Net weight: 5.2kg

Free shipping Australia wide on all orders over $150.
$15 flat rate for all other orders.

30-day postage paid returns.

Revel concerta2 f36 floorstanding speakers - Audio Influence Australia

Revel concerta2 f36 floorstanding speakers - Audio Influence Australia 2

Revel concerta2 f36 floorstanding speakers - Audio Influence Australia 3

Revel

Revel Concerta2 F36 Floorstanding Speakers

$3,995.00

DESCRIPTION

The F36 is a true full range 2 1/2-way 6.5” floorstanding loudspeaker that was designed to provide true high-end sound quality. It will deliver an impressive combination of wide frequency range, uncompressed dynamic range and low distortion across the entire audible spectrum.

High frequency response is supported by 1 inch aluminum dome tweeters that were derived from Revel’s Performa3 series. Low/Mid range frequency response is supported by 6.5” Aluminum cone woofers featuring low-distortion motor-structures for greater clarity and accuracy with improved sensitivity and output capability.

The patented wave guide design improves tweeter to woofer blend and significantly improves off-axis response for consistent performance over a wide listening area. In doing this we sacrificed no details by making sure no fasteners were visible allowing the speaker to show enhancing smooth lines of the cabinet and magnetically attached grilles. To finish the enclosure, we selected high gloss black and white finishes to highlight the features of this beautiful speaker.

FEATURES

Derived from Revel’s award-winning Performa3 Series Loudspeakers
6.5"deep anodized aluminum cone woofers
1" Aluminum Tweeter
Fourth generation Acoustic Lens waveguides
Computer optimized driver positioning and network integration
Constant Pressure Gradient Port Design
No visible fasteners on the front, top or side panels
Magnetic grilles with brushed metallic logos

SPECIFICATIONS

Description: 2 1/2-way Triple 6.5" Floorstanding Loudspeaker
High-frequency Driver Components: 1" Aluminum Tweeter with Acoustic Lens Waveguide
Low-frequency Driver Components: 3 x 6.5" Aluminum Cone Woofer
Low Frequency Extension: 51Hz, 45Hz, 33Hz
Crossover Frequencies: 600Hz, 1.8kHz
Recommended Amplifier Power: 30 - 200 Watts
Nominal Impedance: 8 Ohms
Sensitivity: 91dB (2.83V @ 1M)
Enclosure Type: Bass-reflex via Front-firing Port
Finishes: Black, White
Dimensions (H x W x D): 1,124 mm x 245 mm x 305 mm
Net weight: 22.7kg

Free shipping Australia wide on all orders over $150.
$15 flat rate for all other orders.

30-day postage paid returns.

Revel concerta2 f35 floorstanding speakers - Audio Influence Australia

Revel concerta2 f35 floorstanding speakers - Audio Influence Australia 2

Revel concerta2 f35 floorstanding speakers - Audio Influence Australia 3

Revel

Revel Concerta2 F35 Floorstanding Speakers

$2,995.00

DESCRIPTION

The Concerta2 F35 floorstanding loudspeaker was designed to deliver outstanding accuracy over a remarkably wide frequency range. The 2 1/2-way triple 5.25” floorstanding loudspeaker has the ability to provide performance worthy of the most demanding entertainment systems.

The F35 is a true full range 2 1/2-way 5.25” floorstanding loudspeaker that was designed to provide true high-end sound quality. It will deliver an impressive combination of wide frequency range, uncompressed dynamic range and low distortion across the entire audible spectrum.

High frequency response is supported by 1 inch aluminum dome tweeters that were derived from Revel’s Performa3 series. Low/Mid range frequency response is supported by 5.25” Aluminum cone woofers featuring low-distortion motor-structures for greater clarity and accuracy with improved sensitivity and output capability.

The patented wave guide design improves tweeter to woofer blend and significantly improves off-axis response for consistent performance over a wide listening area. In doing this we sacrificed no details by making sure no fasteners were visible allowing the speaker to show enhancing smooth lines of the cabinet and magnetically attached grilles. To finish the enclosure, we selected high gloss black and white finishes to highlight the features of this beautiful speaker.

FEATURES

Derived from Revel’s award-winning Performa3 Series Loudspeakers
5.25"deep anodized aluminum cone woofers
1" Aluminum Tweeter
Fourth generation Acoustic Lens waveguides
Computer optimized driver positioning and network integration
Constant Pressure Gradient Port Design
No visible fasteners on the front, top or side panels
Magnetic grilles with brushed metallic logos

SPECIFICATIONS

Description: 2 1/2-way Triple 5.25" Floorstanding Loudspeaker
High-frequency Driver Components: 1" Aluminum Tweeter with Acoustic Lens Waveguide
Low-frequency Driver Components: 3 x 5.25" Aluminum Cone Woofer
Low Frequency Extension: 55Hz, 46Hz, 35Hz (-3 dB, -6 dB, -10 dB)
Recommended Amplifier Power: 30 - 180 Watts
Crossover Frequencies: 600Hz, 1.8kHz
Nominal Impedance: 8 Ohms
Sensitivity: 90dB (2.83V @ 1M)
Enclosure Type: Bass-reflex via Front-firing Port
Finishes: Black, White
Dimensions (H x W x D): 1022 mm x 214 mm x 310 mm
Net weight: 18.6kg

Free shipping Australia wide on all orders over $150.
$15 flat rate for all other orders.

30-day postage paid returns.

Revel concerta2 m16 bookshelf speakers - Audio Influence Australia

Revel concerta2 m16 bookshelf speakers - Audio Influence Australia 2

Revel concerta2 m16 bookshelf speakers - Audio Influence Australia 3

Revel

Revel Concerta2 M16 Bookshelf Speakers

$1,695.00

DESCRIPTION

The Concerta2 M16 bookshelf loudspeaker was designed to deliver outstanding accuracy over a remarkably wide frequency range. The 2-way 6.5” bookshelf has the ability to provide performance worthy of the most demanding entertainment systems.

The M16 is a true full range 2-way 6.5” bookshelf that features a small footprint and elegant design. It will deliver an impressive combination of wide frequency range, uncompressed dynamic range and low distortion across the entire audible spectrum.

High frequency response is supported by 1 inch aluminum dome tweeters that were derived from Revel’s Performa3 series. Low/Mid range frequency response is supported by 6.5” Aluminum cone woofers featuring low-distortion motor-structures for greater clarity and accuracy with improved sensitivity and output capability.

The patented wave guide design improves tweeter to woofer blend and significantly improves off-axis response for consistent performance over a wide listening area. In doing this we sacrificed no details by making sure no fasteners were visible allowing the speaker to show enhancing smooth lines of the cabinet and magnetically attached grilles. To finish the enclosure, we selected high gloss black and white finishes to highlight the features of this beautiful speaker.

FEATURES

Derived from Revel’s award-winning Performa3 Series Loudspeakers
6.5"deep anodized aluminum cone woofers
1" Aluminum Tweeter
Fourth generation Acoustic Lens waveguides
Computer optimized driver positioning and network integration
Constant Pressure Gradient Port Design
No visible fasteners on the front, top or side panels
Magnetic grilles with brushed metallic logos

SPECIFICATIONS

Description: 2-way 6.5" Bookshelf Loudspeaker
High-frequency Driver Components: 1 '' Aluminium Tweeter with Acoustic Lens Waveguide
Low-frequency Driver Components: 6.5" Aluminium Cone Woofer
Low Frequency Extension: 55Hz, 50Hz, 45Hz (-3 dB, -6 dB, -10 dB)
Crossover Frequencies: 2.1 kHz
Recommended Amplifier Power: 50-120 Watts
Nominal Impedance: 6 Ohms
Sensitivity: 86dB (2.83V @ 1M)
Enclosure Type: Bass-reflex via Rear-firing Port
Finishes: Black, White
Dimensions (H x W x D): 375 mm x 218 mm x 273 mm
Net weight: 7.3kg

Free shipping Australia wide on all orders over $150.
$15 flat rate for all other orders.

30-day postage paid returns.

Revel concerta2 s16 bookshelf speakers - Audio Influence Australia

Revel concerta2 s16 bookshelf speakers - Audio Influence Australia 2

Revel concerta2 s16 bookshelf speakers - Audio Influence Australia 3

Revel concerta2 s16 bookshelf speakers - Audio Influence Australia 4

Revel

Revel Concerta2 S16 Surround Speaker

$995.00

DESCRIPTION

The Concerta2 S16 on-wall loudspeaker was designed to deliver outstanding accuracy over a remarkably wide frequency range. The 2-way 6.5” on-wall loudspeaker has the ability to provide performance worthy of the most demanding entertainment systems.

The S16 is a true full range 2-way 6.5” on-wall loudspeaker that was designed to integrate the entire system’s sound into a spacious, enveloping surround-sound environment. By truly being a multi-use speaker the S16 is capable of acting as a LCR or surround sound speaker depending on the specific application. It will deliver an impressive combination of wide frequency range, uncompressed dynamic range and low distortion across the entire audible spectrum.

High frequency response is supported by 1 inch aluminum dome tweeters that were derived from Revel’s Performa3 series. Low/Mid range frequency response is supported by 6.5” Aluminum cone woofers featuring low-distortion motor-structures for greater clarity and accuracy with improved sensitivity and output capability.

The patented wave guide design improves tweeter to woofer blend and significantly improves off-axis response for consistent performance over a wide listening area. In doing this we sacrificed no details by making sure no fasteners were visible allowing the speaker to show enhancing smooth lines of the cabinet and magnetically attached grilles. To finish the enclosure, we selected high gloss black and white finishes to highlight the features of this beautiful speaker.

FEATURES

Derived from Revel’s award-winning Performa3 Series Loudspeakers
6.5"deep anodized aluminum cone woofers
1" Aluminum Tweeter
Fourth generation Acoustic Lens waveguides
Computer optimized driver positioning and network integration
No visible fasteners on the front, top or side panels
Magnetic grilles with brushed metallic logos
High-gloss Black and High-gloss White painted finishes

SPECIFICATIONS

Description: 2-way 6.5" Bookshelf Loudspeaker
High-frequency Driver Components: 1 '' Aluminium Tweeter with Acoustic Lens Waveguide
Low-frequency Driver Components: 6.5" Aluminium Cone Woofer
Low Frequency Extension: 70Hz, 58Hz, 43Hz (-3 dB, -6 dB, -10 dB)
Crossover Frequencies: 1.8kHz
Recommended Amplifier Power: 30-120 Watts
Nominal Impedance: 6 Ohms
Sensitivity: 90dB (2.83V @ 1M)
Enclosure Type: Sealed
Finishes: Black, White
Dimensions (H x W x D): 375 mm x 338 mm x 138 mm
Net weight: 6.4kg

Free shipping Australia wide on all orders over $150.
$15 flat rate for all other orders.

30-day postage paid returns.

Revel concerta2 c25 centre speaker - Audio Influence Australia

Revel concerta2 c25 centre speaker - Audio Influence Australia 2

Revel concerta2 c25 centre speaker - Audio Influence Australia 3

Revel

Revel Concerta2 C25 Centre Speaker

$1,295.00

DESCRIPTION

The Concerta2 C25 center channel loudspeaker was designed to deliver outstanding accuracy over a remarkably wide frequency range. The 2-way 5.25” center channel loudspeaker has the ability to provide performance worthy of the most demanding entertainment systems.

The C25 is a true full range 2-way 5.25” center channel loudspeaker that was designed to be the true acoustical anchor for the entire system. It will deliver an impressive combination of wide frequency range, uncompressed dynamic range and low distortion across the entire audible spectrum.

High frequency response is supported by 1 inch aluminum dome tweeters that were derived from Revel’s Performa3 series. Low/Mid range frequency response is supported by 5.25” Aluminum cone woofers featuring low-distortion motor-structures for greater clarity and accuracy with improved sensitivity and output capability.

The patented wave guide design improves tweeter to woofer blend and significantly improves off-axis response for consistent performance over a wide listening area. In doing this we sacrificed no details by making sure no fasteners were visible allowing the speaker to show enhancing smooth lines of the cabinet and magnetically attached grilles. To finish the enclosure, we selected high gloss black and white finishes to highlight the features of this beautiful speaker.

FEATURES

Derived from Revel’s award-winning Performa3 Series Loudspeakers
5.25"deep anodized aluminum cone woofers
1" Aluminum Tweeter
Fourth generation Acoustic Lens waveguides
Computer optimized driver positioning and network integration
No visible fasteners on the front, top or side panels
Magnetic grilles with brushed metallic logos
High-gloss Black and High-gloss White painted finishes

SPECIFICATIONS

Description: 2-way Dual 5.25" Center Channel Loudspeaker
High-frequency Driver Components: 1 '' Aluminium Tweeter with Acoustic Lens Waveguide
Low-frequency Driver Components: 2 x 2.25" Aluminium Cone Woofer
Low Frequency Extension: 80Hz, 68Hz, 48Hz (-3 dB, -6 dB, -10 dB)
Crossover Frequencies: 2.1kHz
Recommended Amplifier Power: 40-120 Watts
Nominal Impedance: 6 Ohms
Sensitivity: 89dB (2.83V @ 1M)
Enclosure Type: Sealed
Finishes: Black, White
Dimensions (H x W x D): 184 mm x 316 mm x 257 mm
Net weight: 9.1kg

Free shipping Australia wide on all orders over $150.
$15 flat rate for all other orders.

30-day postage paid returns.

Revel concerta2 b10 subwoofer - Audio Influence Australia

Revel concerta2 b10 subwoofer - Audio Influence Australia 2

Revel concerta2 b10 subwoofer - Audio Influence Australia 3

Revel concerta2 b10 subwoofer - Audio Influence Australia 4

Revel concerta2 b10 subwoofer - Audio Influence Australia 5

Revel

Revel Concerta2 B10 Subwoofer

$2,695.00

DESCRIPTION

The B10 is a powerful 800 watt 10” powered subwoofer that was designed to provide powerful and clear low frequency response. It will add essential bass response to any music or home theater system.

The 800 Watt RMS (1600 Watt peak) amplifier powers the voice coil to provide ample power for the large diaphragm area and long-excursion capability.

By repositioning the voice coil in the woofer, Revel engineers discovered they could improve the symmetry of the woofer displacement and thereby lower distortion. Additionally, asymmetry attributed to spider non-linearity can also lead to higher distortion. This was solved by adjusting the spider progression to greatly improve the symmetry and as a result, lowered distortion. To finish the enclosure, we selected high gloss black and white finishes to highlight the features of this beautiful subwoofer.

FEATURES

Derived from Revel’s award-winning Performa3 Series Loudspeakers
10" Coated Fiber-Composite Cone
Constant Pressure Gradient Port Design
Detectable grilles with brushed metallic logos
High-gloss Black and High-gloss White painted finishes
800 Watt 10” Powered Subwoofer
Single band parametric EQ

SPECIFICATIONS

Driver Components: 10" Coated Fibre-Composite Cone, Cast- Frame Woofer
Amplifier Power: 800W RMS
Crossover Frequencies: Variable 50 – 150Hz
Low Frequency Extension: 35Hz, 32Hz, 29Hz (-3 dB, -6 dB, -10 dB)
Enclosure Type: Bass-Reflex via Rear-Firing Port
Finishes: Black, White
Dimensions (H x W x D): 218 mm x 377 mm x 392 mm
Net weight: 24kg

Free shipping Australia wide on all orders over $150.
$15 flat rate for all other orders.

30-day postage paid returns.

Revel

Revel C25 Stand

$329.00

DESCRIPTION

Revel stand for the C25 Centre speaker. This matching pedestal stand raises the speaker and angles it slightly upward to help it blend in with your front left and right pair.

FEATURES

matching pedestal stand for Revel's Concerta2 C25 center channel speaker
C25 speaker is secured to the stand with four screws
can also be used with other center channel speakers weighing up to 20 lbs. (but will not secure with mounting screws)
upright front post of the stand is hollow to allow wire management
includes four spiked feet for use on carpeted floors, and four protective discs to place under the spikes on hardwood or tile floors

Free shipping Australia wide on all orders over $150.
$15 flat rate for all other orders.

30-day postage paid returns.

Revel

Revel M16 Stands

$695.00

DESCRIPTION

These stands are custom-designed to place Revel's Concerta2 M16 speaker at the ideal listening height. The stands include spiked feet for use on carpeted floors, and protective discs to place under the spikes for use on hardwood, tile, or vinyl floors.

FEATURES

matching stands for Revel's Concerta2 M16 bookshelf speaker
M16 speakers attach to these stands with supplied mounting screws
stands may be used with other brands of bookshelf speakers that weigh up to 20 lbs. each (but they will not secure with mounting screws)
sturdy aluminum upright posts and heavy-duty steel bases with a matte black finish
upright front post of each speaker stand is hollow, allowing you to neatly route the speaker wire from the floor up to your speaker
includes spikes for placing the stands on carpet, and protective discs to place under the spikes for use on hardwood, tile, or vinyl floors

Free shipping Australia wide on all orders over $150.
$15 flat rate for all other orders.

30-day postage paid returns.

Revel c263 in ceiling loudspeaker - Audio Influence Australia

Revel c263 in ceiling loudspeaker - Audio Influence Australia 2

Revel c263 in ceiling loudspeaker - Audio Influence Australia 3

Revel c263 in ceiling loudspeaker - Audio Influence Australia 4

Revel c263 in ceiling loudspeaker - Audio Influence Australia 5

Revel

Revel C363 In-Ceiling Loudspeaker

$349.00

DESCRIPTION

Since the first Revel® speakers in 1996, Revel products have stood at the forefront of loudspeaker design and performance. Revel in-ceiling loudspeakers draw upon the same research, resources and unique perspective that put all Revel loudspeakers in a class by themselves. Revel in-ceiling loudspeakers provide unparalleled value and are known for their standard-setting low sonic colouration and their freedom from distortion over an extraordinarily wide dynamic range.

For true audiophile performance and easy timbre-matching to Revel in-wall, floorstanding, monitor and center-channel loudspeakers, all models* feature Revel low-distortion motor-structure designs with aluminum-dome tweeters and Micro-Ceramic Composite (MCC) cone woofers. This allows for easy integration into home cinema systems.

FEATURES

Long-throw woofers with rubber surrounds provide high output with low distortion
A 1-inch (25mm) metal-dome tweeter with an integrated waveguide provides optimized response both on and off axis
A high-order crossover network delivers accurate timbre reproduction
Includes both round & square Zero-Bezel magnetic grilles.
C-2 Installation Mechanism
Preconstruction Bracket and Fire-Rated

SPECIFICATIONS

Description: 6 ½” In-Ceiling Loudspeaker
High-frequency Driver Components: 1 '' Aluminium Tweeter with Waveguide
Low-frequency Driver Components: 6.5" Micro-Ceramic Composite (MCC) Cone, Cast-Polymer Frame Woofer
Sensitivity: 87dB @ 2.83V, 1 m
Recommended Amplifier Power: 10-120 Watts
Cutout Dimensions: 203mm
Round Grille Finished Dimension (D): 231mm
Square Grille Finished Dimensions (H x W): 231 mm x 231 mm
Mounting Depth: 122mm
Net weight: 1.1kg

Free shipping Australia wide on all orders over $150.
$15 flat rate for all other orders.

30-day postage paid returns.

Revel c263 in ceiling loudspeaker 1 - Audio Influence Australia

Revel c263 in ceiling loudspeaker 1 - Audio Influence Australia 2

Revel c263 in ceiling loudspeaker 1 - Audio Influence Australia 3

Revel c263 in ceiling loudspeaker 1 - Audio Influence Australia 4

Revel

Revel C263 In-Ceiling Loudspeaker

$199.50

DESCRIPTION

Since the first Revel® speakers in 1996, Revel products have stood at the forefront of loudspeaker design and performance. Revel in-ceiling loudspeakers draw upon the same research, resources and unique perspective that put all Revel loudspeakers in a class by themselves. Revel in-ceiling loudspeakers provide unparalleled value and are known for their standard-setting low sonic colouration and their freedom from distortion over an extraordinarily wide dynamic range.

For true audiophile performance and easy timbre-matching to Revel in-wall, floorstanding, monitor and center-channel loudspeakers, all models* feature Revel low-distortion motor-structure designs with aluminum-dome tweeters and Micro-Ceramic Composite (MCC) cone woofers. This allows for easy integration into home cinema systems.

FEATURES

Long-throw woofers with rubber surrounds provide high output with low distortion
A 1-inch (25mm) metal-dome tweeter with an integrated waveguide provides optimized response both on and off axis
A high-order crossover network delivers accurate timbre reproduction
C-2 Installation Mechanism
Preconstruction Bracket and Fire-Rated

SPECIFICATIONS

Description: 6 ½” In-Ceiling Loudspeaker
High-frequency Driver Components: 1 '' Aluminium Tweeter with Waveguide
Low-frequency Driver Components: 6-1/2” Aluminum Cone, Cast-Polymer Frame Woofer
Sensitivity: 86dB @ 2.83V, 1 m
Recommended Amplifier Power: 10-100 Watts
Cutout Dimensions: 203MM
Round Grille Finished Dimension (D): 231mm
Mounting Depth: 120mm
Net weight: 2.1kg

Free shipping Australia wide on all orders over $150.
$15 flat rate for all other orders.

30-day postage paid returns.

Revel c563 in ceiling loudspeaker - Audio Influence Australia

Revel c563 in ceiling loudspeaker - Audio Influence Australia 2

Revel c563 in ceiling loudspeaker - Audio Influence Australia 3

Revel c563 in ceiling loudspeaker - Audio Influence Australia 4

Revel c563 in ceiling loudspeaker - Audio Influence Australia 5

Revel

Revel C563 In-Ceiling Loudspeaker

$499.00

DESCRIPTION

Since the first Revel® speakers in 1996, Revel products have stood at the forefront of loudspeaker design and performance. Revel in-ceiling loudspeakers draw upon the same research, resources and unique perspective that put all Revel loudspeakers in a class by themselves. Revel in-ceiling loudspeakers provide unparalleled value and are known for their standard-setting low sonic colouration and their freedom from distortion over an extraordinarily wide dynamic range.

For true audiophile performance and easy timbre-matching to Revel in-wall, floorstanding, monitor and center-channel loudspeakers, all models* feature Revel low-distortion motor-structure designs with aluminum-dome tweeters and Micro-Ceramic Composite (MCC) cone woofers. This allows for easy integration into home cinema systems.

FEATURES

Long-throw woofers with rubber surrounds provide high output with low distortion
A 1-inch (25mm) metal-dome tweeter with an integrated waveguide provides optimized response both on and off axis
A high-order crossover network delivers accurate timbre reproduction
Includes both round & square Zero-Bezel magnetic grilles.
C-2 Installation Mechanism
Preconstruction Bracket and Fire-Rated
Three-position tweeter level control (C783/C763/C583/C563) lets you adjust for optimum response in a variety of acoustical environments, or for using the speakers without grilles

SPECIFICATIONS

Description: 6 ½” In-Ceiling Loudspeaker
High-frequency Driver Components: 1 '' Aluminium Tweeter with Waveguide
Low-frequency Driver Components: 6.5" Micro-Ceramic Composite (MCC) Cone, Cast-Aluminium Frame Woofer
Sensitivity: 88dB @ 2.83V, 1 m
Recommended Amplifier Power: 10-130 Watts
Cutout Dimensions: 203mm
Round Grille Finished Dimension (D): 231mm
Square Grille Finished Dimensions (H x W): 231 mm x 231 mm
Mounting Depth: 125mm
Net weight: 1.2kg

Free shipping Australia wide on all orders over $150.
$15 flat rate for all other orders.

30-day postage paid returns.

Revel c763 in wall loudspeaker - Audio Influence Australia

Revel c763 in wall loudspeaker - Audio Influence Australia 2

Revel c763 in wall loudspeaker - Audio Influence Australia 3

Revel c763 in wall loudspeaker - Audio Influence Australia 4

Revel c763 in wall loudspeaker - Audio Influence Australia 5

Revel

Revel C763 In-Ceiling Loudspeaker

$699.00

DESCRIPTION

Since the first Revel® speakers in 1996, Revel products have stood at the forefront of loudspeaker design and performance. Revel in-ceiling loudspeakers draw upon the same research, resources and unique perspective that put all Revel loudspeakers in a class by themselves. Revel in-ceiling loudspeakers provide unparalleled value and are known for their standard-setting low sonic colouration and their freedom from distortion over an extraordinarily wide dynamic range.

For true audiophile performance and easy timbre-matching to Revel in-wall, floorstanding, monitor and center-channel loudspeakers, all models* feature Revel low-distortion motor-structure designs with aluminum-dome tweeters and Micro-Ceramic Composite (MCC) cone woofers. This allows for easy integration into home cinema systems.

FEATURES

Long-throw woofers with rubber surrounds provide high output with low distortion
A 1-inch (25mm) metal-dome tweeter with an integrated waveguide provides optimized response both on and off axis
A high-order crossover network delivers accurate timbre reproduction
Includes both round & square Zero-Bezel magnetic grilles.
C-2 Installation Mechanism
Preconstruction Bracket and Fire-Rated
Three-position tweeter level control (C783/C763/C583/C563) lets you adjust for optimum response in a variety of acoustical environments, or for using the speakers without grilles
Boundary compensation switch (W893/W873/W783/W763) lets you adjust the speaker to maintain tonal accuracy when the speaker is placed near an additional wall or the ceiling

SPECIFICATIONS

Description: 6 ½” In-Ceiling Loudspeaker
High-frequency Driver Components: 1" aluminum dome swiveling high-output tweeter with waveguide
Low-frequency Driver Components: 6 ½" Micro-Ceramic Composite (MCC) Cone, Cast-Aluminum Frame High-Output Woofer
Sensitivity: 88dB @ 2.83V
Recommended Amplifier Power: 10-140 Watts
Cutout Dimensions: 203mm
Round Grille Finished Dimension (D): 231mm
Square Grille Finished Dimensions (H x W): 231 mm x 231 mm
Mounting Depth: 125mm
Net weight: 1.5kg

Free shipping Australia wide on all orders over $150.
$15 flat rate for all other orders.

30-day postage paid returns.

Revel c363dt in wall loudspeaker - Audio Influence Australia

Revel c363dt in wall loudspeaker - Audio Influence Australia 2

Revel c363dt in wall loudspeaker - Audio Influence Australia 3

Revel c363dt in wall loudspeaker - Audio Influence Australia 4

Revel c363dt in wall loudspeaker - Audio Influence Australia 5

Revel

Revel C363DT In-Ceiling Loudspeaker

$449.00

DESCRIPTION

Since the first Revel® speakers in 1996, Revel products have stood at the forefront of loudspeaker design and performance. Revel in-ceiling loudspeakers draw upon the same research, resources and unique perspective that put all Revel loudspeakers in a class by themselves. Revel in-ceiling loudspeakers provide unparalleled value and are known for their standard-setting low sonic colouration and their freedom from distortion over an extraordinarily wide dynamic range.

For true audiophile performance and easy timbre-matching to Revel in-ceiling, floorstanding, monitor and center-channel loudspeakers, all models* feature Revel low-distortion motor-structure designs with aluminum-dome tweeters and Micro-Ceramic Composite (MCC) cone woofers. This allows for easy integration into home cinema systems.

FEATURES

Long-throw woofers with rubber surrounds provide high output with low distortion
A 1-inch (25mm) metal-dome tweeter with an integrated waveguide provides optimized response both on and off axis
A high-order crossover network delivers accurate timbre reproduction
Includes both round & square Zero-Bezel magnetic grilles.
C-2 Installation Mechanism
Preconstruction Bracket and Fire-Rated

SPECIFICATIONS

Description: 6-1/2" Dual-Tweeter In-ceiling Loudspeaker
High-frequency Driver Components: 2 x 1 '' Aluminium Tweeter with Waveguide
Low-frequency Driver Components: 6.5" Micro-Ceramic Composite (MCC) Cone, Cast-Polymer Frame Woofer
Sensitivity: 88dB @ 2.83V, 1 m
Recommended Amplifier Power: 10-120 Watts
Cutout Dimensions: 203mm
Round Grille Finished Dimension (D): 231mm
Square Grille Finished Dimensions (H x W): 231 mm x 231 mm
Mounting Depth: 122mm
Net weight: 1.2kg

Free shipping Australia wide on all orders over $150.
$15 flat rate for all other orders.

30-day postage paid returns.

Revel c563dt in ceiling loudspeaker - Audio Influence Australia

Revel c563dt in ceiling loudspeaker - Audio Influence Australia 2

Revel c563dt in ceiling loudspeaker - Audio Influence Australia 3

Revel c563dt in ceiling loudspeaker - Audio Influence Australia 4

Revel

Revel C563DT In-Ceiling Loudspeaker

$499.00

DESCRIPTION

Since the first Revel® speakers in 1996, Revel products have stood at the forefront of loudspeaker design and performance. Revel in-ceiling loudspeakers draw upon the same research, resources and unique perspective that put all Revel loudspeakers in a class by themselves. Revel in-ceiling loudspeakers provide unparalleled value and are known for their standard-setting low sonic colouration and their freedom from distortion over an extraordinarily wide dynamic range.

For true audiophile performance and easy timbre-matching to Revel in-wall, floorstanding, monitor and center-channel loudspeakers, all models* feature Revel low-distortion motor-structure designs with aluminum-dome tweeters and Micro-Ceramic Composite (MCC) cone woofers. This allows for easy integration into home cinema systems.

FEATURES

Long-throw woofers with rubber surrounds provide high output with low distortion
A 1-inch (25mm) metal-dome tweeter with an integrated waveguide provides optimized response both on and off axis
A high-order crossover network delivers accurate timbre reproduction
Includes both round & square Zero-Bezel magnetic grilles.
C-2 Installation Mechanism
Preconstruction Bracket and Fire-Rated
Three-position tweeter level control (C783/C763/C583/C563) lets you adjust for optimum response in a variety of acoustical environments, or for using the speakers without grilles

SPECIFICATIONS

Description: 6-1/2" Dual-Tweeter In-ceiling Loudspeaker
High-frequency Driver Components: 2 x 1 '' Aluminium Tweeter with Waveguide
Low-frequency Driver Components: 6.5" Micro-Ceramic Composite (MCC) Cone, Cast-Aluminium Frame Woofer
Sensitivity: 88dB @ 2.83V, 1 m
Recommended Amplifier Power: 10-140 Watts
Cutout Dimensions: 203mm
Round Grille Finished Dimension (D): 231mm
Square Grille Finished Dimensions (H x W): 231 mm x 231 mm
Mounting Depth: 125mm
Net weight: 1.4kg

Free shipping Australia wide on all orders over $150.
$15 flat rate for all other orders.

30-day postage paid returns.

Revel c283 in ceiling loudspeaker - Audio Influence Australia

Revel c283 in ceiling loudspeaker - Audio Influence Australia 2

Revel c283 in ceiling loudspeaker - Audio Influence Australia 3

Revel

Revel C283 In-Ceiling Loudspeaker

$299.50

DESCRIPTION

Since the first Revel® speakers in 1996, Revel products have stood at the forefront of loudspeaker design and performance. Revel in-ceiling loudspeakers draw upon the same research, resources and unique perspective that put all Revel loudspeakers in a class by themselves. Revel in-ceiling loudspeakers provide unparalleled value and are known for their standard-setting low sonic colouration and their freedom from distortion over an extraordinarily wide dynamic range.

For true audiophile performance and easy timbre-matching to Revel in-wall, floorstanding, monitor and center-channel loudspeakers, all models* feature Revel low-distortion motor-structure designs with aluminum-dome tweeters and Micro-Ceramic Composite (MCC) cone woofers. This allows for easy integration into home cinema systems.

FEATURES

Long-throw woofers with rubber surrounds provide high output with low distortion
A 1-inch (25mm) metal-dome tweeter with an integrated waveguide provides optimized response both on and off axis
A high-order crossover network delivers accurate timbre reproduction
Sleek look integrates easily into any decor
C-2 Installation Mechanism Compatible with Wall Material Thickness Range: 13- 25mm
Preconstruction Bracket and Fire-Rated

SPECIFICATIONS

Description: 8” In-Ceiling Loudspeaker
High-frequency Driver Components: 1 '' Aluminium Swiveling Tweeter with Waveguide
Low-frequency Driver Components: 8" Aluminium Cone, Cast-Polymer Frame Woofer
Sensitivity: 87dB @ 2.83V, 1 m
Recommended Amplifier Power: 10-100 Watts
Cutout Dimensions: 244mm
Round Grille Finished Dimension (D): 272mm
Mounting Depth: 130mm
Net weight: 2.71kg

Free shipping Australia wide on all orders over $150.
$15 flat rate for all other orders.

30-day postage paid returns.