F302 FLOORSTANDING SPEAKERS
The price may be ultra-affordable but the F300 range benefits from the very best technical and acoustic expertise in the loudspeaker industry. Offering a scale of specification and acoustic performance unrivalled at its price, the line-up provides versatility for music lovers and movie enthusiasts.
Taking the performance characteristic of its sibling F301 bookshelf design, the floorstanding F302, with its increased cabinet volume, takes the music listening experience to an altogether more dynamic level. The enhanced depth of bass will be appreciated even if listening to the speaker at relatively low volume levels. And the increased power handling capacity ensures that our What HiFi 5 Star F302 won’t suffer from musical compression or distortion for those times when you just have to turn up the volume
A well-constructed cabinet is the starting point for any high-performance loudspeaker. Exceptional rigidity is provided on all F300 models through a combination of MDF panels which are cross-braced internally. Additional stiffness is achieved by coupling the low frequency driver’s magnet to the cabinet bracing using a resonant-absorbing mastic. Widening the footprint on the floor standing models, using a plinth with floor coupling spikes, provides stability for tight bass and accurate stereo imaging.
Optimal performance of each of the F300 models is assured by using the highest quality precision components within the crossover, including low loss Low Frequency laminated core inductor and High Frequency polypropylene capacitors. Although the designs are computer optimised, fine-tuning is always undertaken through critical auditioning.
Fyne Audio aims to provide best in class performance at all price levels and the careful component selection for the F300 drivers helps to meet this goal.
Utilising a multifibre reinforced paper cone on the bass/midrange drivers delivers natural sounding midrange frequencies and clean transient behaviour. Fitted to the centre of the driver is a phase plug which provides smooth midrange roll-off characteristics, coupled with FyneFlute™ technology, used on the driver’s rubber roll surround, provide a non-homogeneous interface which very effectively terminates unwanted cone energy.
The F-300 tweeter combines a powerful Neodymium magnet system with a 25mm Polyester dome producing crisp and controlled high frequency detail. Integrated within the protective mesh cover is a phase loss compensator which delays the output from specific areas of the dome to give a smooth and extended time-aligned response.
|System Type||2 way, rear ported|
|Recommended amplifier power (Watt RMS)||30- 120|
|Continuous power handling (Watt RMS)||60|
|Sensitivity (2.83 Volt @ 1m)||90dB|
|Nominal impedance||8 Ohm|
|Frequency response (-6dB typical in room)||36Hz-28kHz|
|Drive unit complement||1 x 150mm multi-fibre bass/ mid 1 x 25mm polyester dome tweeter|
|Crossover type||2nd order low pass, 3rd order high pass -|
|Dimensions - HxWxD||932 x 190 x 271mm (36.7 x 7.5 x 10.7”)|
|Weight - Each||13.3kg (29.3lb)|
|Finishes||Walnut / Black Ash / Light Oak|