Furman CN-3600 S E 16A Smart Sequencing Power Conditioner, 230V-Audio Influence
Furman CN-3600 S E 16A Smart Sequencing Power Conditioner, 230V-Audio Influence
Furman CN-3600 S E 16A Smart Sequencing Power Conditioner, 230V-Audio Influence
Furman CN-3600 S E 16A Smart Sequencing Power Conditioner, 230V-Audio Influence

Furman CN-3600 S E 16A Smart Sequencing Power Conditioner, 230V

Brand: Furman

No reviews

Regular price$1,199.00
10 interest free payments from $119.90 with

Furman CN-3600 Power Conditioner, 230V

Designed for Commercial A/V Installations in 220V-240V regions, the CN-3600 SE combines robust control capabilities via Smart Sequencing™ Technology, advanced AC protection, AC noise filtration, and optional compatibility with the BlueBOLT® Remote Power and Energy Management Platform (BB-RS232 adaptor required, sold separately).


  • Surge Protection – Series Multi-Stage Protection (SMP) Technology provides the highest level of surge & spike protection available.
  • Noise Filtration – Linear Filtration Technology (LiFT) reduces AC noise linearly across a very wide bandwidth for unequaled audio & video clarity.
  • Voltage Protection – Extreme Voltage Shutdown (EVS) circuity safely powers down itself and connected equipment during unsafe voltage periods.
  • Smart Sequencing™ – Smart Sequencing allows bidirectional, safe sequenced power up/down operations via the push of a button or turn of a key.
  • Diagnostic Lights – Diagnostic lights provide valuable system information including power quality, “Protectection Ok” indicator, and Extreme Voltage indicator.
  • 16 Amp Output Current – 16 amp maximum current capacity with incorporated 16 amp thermal circuit breaker.
  • Remote Access (RS-232) – RS-232 compatibility & command set provide integration with control systems, open source and control programming.
  • BlueBOLT Compatible® – BlueBOLT provides remote access to reboot components, power equipment on/off, and monitor power quality via the internet from anywhere in the world.
  • Nine Total Outlets – The CN-3600 SE contains eight rear panel IEC C13 outlets and one front panel IEC C13 outlet.
  • AC Voltage Input Range 180-270VAC, 50/60Hz
  • Maximum AC Current Rating 16 amps (Thermal breaker)
  • AC Cord 1.5mm2x3, 2.5m Long, black, IEC C19 Female to Schuko CEE 7/7 Male Plug
  • Rear Panel Outlets 1 IEC C13 pair (Unswitched), 3 IEC C13 pairs (Sequenced, each pair is controlled by separate relay)
  • Front Panel 1 IEC C13 (Unswitched)
  • Surge/Under-Overvoltage Protection AC Surge Protection Series Multi-Stage Protection SMP
  • Spike Protection Mode Line to neutral, zero ground leakage
  • Spike Clamping Voltage 375V peak @ 6,000 volts/3,000 amps
  • Response Time 1 nanosecond
  • Maximum Surge Current 6,500 Amps
  • AC Undervoltage Protection EVS, 175VAC+/-3VAC
  • AC Overvoltage Protection EVS, 275VAC+/-5VAC
  • AC Overvoltage Reset Modes Manual and Auto-reset (configurable)
  • AC Filtering LiFT
  • Noise Attenuation Linear, 10dB @10KHz, 40dB@100KHz, 50dB@500KHz
  • Operating Temperature Range 5C (40F) to 40C (105F) degrees
  • Humidity Range <90% rH (Relative Humidity)
  • Key switch Front panel, 3-position key switch (On, Off, Remote)
  • Keys Included, 1 pair
  • Pushbutton Switch Front panel, hidden by security cover
  • Circuit Breaker Front panel, pushbutton, 20A Thermal Breaker
  • Front panel diagnostic indicators Primary link, Secondary link, Ethernet, Remote off, Delay 1, Delay 2, Delay 3, Power, Protection OK, Extreme Voltage
  • Front Panel DIP Switches Front panel. Hidden by security cover, 1 Minute Delay, 2 Minute Delay, 4 Minute Delay, Force Off NO/NC, 12V Mode On/Off BND Mode On, Momentary/Maintained, Primary/Secondary, EVS Reset Auto/Manual
  • Potentiometer Front panel, hidden by security cover, fine tune delay adjust
  • Control/Status/Triggering (Rear Panel) Remote Terminal +5-30VDC In, 12VDC (12mA) Out
  • Smart Sequencing Phoenix 4-Pin Connector, Screw Terminals, Primary & Secondary Links (Current Loop – 1000’ nominal)
  • Remote Terminal Phoenix 4-Pin Connector With Screw Terminals; +12V, STAT, REM, GND (Class 2 Wiring)
  • Force Off/Delay 3 Terminal Phoenix 5-Pin Connector With Screw Terminals, FORCE OFF, DELAY 3 (Class 2 Wiring)
  • RS-232 Compatible Yes, DB-9 Connector
  • IP Addressability Optional, via BB-RS232 Ethernet/RS-232 Adaptor (sold separately) for IP control via Telnet, HTTP, BlueBOLT®
  • Voltmeter Available with RS-232/Ethernet option, ± 2VAC accuracy
  • Ammeter Available with RS-232/Ethernet option, ±1A accuracy
  • Power Consumption (No Load) 10 Watts
  • Safety Agency NRTL-C, RoHS Compliant

Other Specifications


  • Family Contractor Series 240V
  • Line Voltage240 (Volts)

Shipping Info

  • Length 22.2 (Inches)
  • Width 15 (Inches)
  • Height 4.3 (Inches)
  • Weight 12.2 (Lbs)
  • Unit of Measure Each

    Instagram @audio_influence

    Product Type: Power Power Conditioners

    Recently viewed