Subwoofers

DESCRIPTION

The Yamaha NS-SW050 home cinema powered subwoofer is a compact subwoofer incorporating a number of Yamaha’s advanced and a high performance bass technologies such as Twisted Flare Port and Advanced YST II (Yamaha Active Servo Technology II) with discrete amp circuitry and high quality 20 cm (8”) woofer unit.  This results in sensational bass response that enhances overall listening enjoyment of music and movies. 

FEATURES

• New Twisted Flare Port contributes to clear and tight bass
• Advanced YST II (Yamaha Active Servo Technology II)
• 20 cm (8”) cone woofer
• Stylish addition to any room

SPECIFICATIONS

DESCRIPTION

The Polk HTS 12 subwoofer enhances home theatre and music listening with powerful deep bass.  Whether you’re installing a new set of surround or ATMOS speakers, adding a second subwoofer for the ultimate home theater experience, or just need more core-pounding impact from your favorite music, the HTS 12 delivers the powerful bass you crave.

DESIGN

It features a long-throw Dynamic Balance 12” driver, patented Power Port technology and a state-of-the-art 400W Class D amplifier. Easily to access controls for volume, low pass filter, and phase correction. Connect via LFE (unfiltered / low pass disabled) or stereo line level RCA inputs.

SOUND

The Polk HTS12 powered subwoofer is capable of producing deep bass for home theatre and music listening with it's front-firing long-throw 12” Polypropylene Dynamic Balance and Klippel optimized driver.  Utilising it's floor-firing patented Power Port Technology for even deeper bass response while reducing port noise.  

Built-in controls for variable volume, low pass filter and phase (0/180°) for optimum bass levels.

SPECIFICATIONS 

• Woofer:  12” front-firing long-throw polypropylene 
• Cabinet:  Down-firing Power Port
• Amplifier:  Class D, 200w continuous, 400w peak 
• Freq. Response:  30-120Hz (-3dB) 
• Inputs:  LFE, line-level 
• Features:  Volume control, variable low-pass filter, 0/180° phase switch, Auto On/Off, 12v trigger 
• Dimensions:  35.6 H x 33.0 W x 36.5 D (cm)
• Weight:  22.6kg each 

DESCRIPTION

The Polk MagniFi MAX maximum-performance home theater sound bar and wireless subwoofer system provides bigger, more dynamic sound than traditional sound bars—and is optimized to make movies, TV, sports and music come alive. It features patented SDA surround technology for a wider, more immersive listening experience and Voice Adjust technology for crystal clear dialogue—and with Polk Smart Remote technology it works with your Samsung, Sony, Vizio and LG TV remote right out of the box. Includes HDMI and optical cables for quick and easy setup. And built-in Bluetooth and Google Chromecast Built-in technologies let you stream all of your favorite music.

DESIGN

Unique wall-mounting system for horizontal adjustment to ensure the sound bar remains level and centered under your TV. Slim design won’t block your TV’s remote sensor- only 2" tall.

SOUND

Seven driver array and the included powerful wireless subwoofer creates an immersive multi-dimensional sound via 5.1 Dolby Digital, DTS and exclusive Polk SDA surround technology for an incredible room-filling listening experience.

SPECIFICATIONS 

• VoiceAdjust technology: customisable voice levels
• SDA Technology: Creates expansive multi-dimensional sound experience
• IR Learning: the sound bar works with your TV’s remote
• Dolby Audio/DTS:  creates room-filling virtual surround sound
• Wireless Music: Google Chromecast built-in, Wi-Fi streaming (dual band)
• Movie/Music/Night modes: one-button preset EQ settings
• Works with 4K: HDMI 2.0a inputs/output handle HDR & HDCP 2.2
• Inputs: 3 x HDMI (1 x ARC), RJ-45, Bluetooth, Optical, 3.5mm AUX
• Outputs: 1 x HDMI (ARC)
• Drivers:  (Bar) 2 x 0.75” tweeters, 1” midrange, 4 x 1” x 3” oval woofers (Sub) 8” woofer
• Dimensions: (Bar) 5.3 H x 109.2 W x 9.6 D (cm), (Sub) 37.0 H x 37.1 W x 30.8 D (cm)
• Weight:  (Bar) 2.8kg, (Sub) 6.2kg

ADDON C-SUB POWERED SUBWOOFER

DESCRIPTION

The wireless Addon C-SUB multiroom subwoofer is distinctively small, but delivers a massive punch that you really can feel. It’s a perfect 23cm cube of heart-pounding, definitive bass enjoyment. Wireless auto connect to the nearest Audio Pro multiroom speaker, or play old school with cable. Easy to place, easy to love. More bass to your music, with less wire clutter.

Bass proof your home
For a deeper sensation of your music, the C-Sub matches perfectly with any Audio Pro multiconnected speakers. You can add as many C-SUB subwoofers as you like in your multiroom setup. In the app everybody can play their personal music on which ever speaker they want. Or all of them. Play from internet streaming services, from a computer or NAS in your network, or music on your phone. Everything controlled by the App Of Simplicity.

Control the power
Power is nothing without control. The Addon Sub has variable crossover and you can shift phase for easier placement and adjustment to your room.

Play nice everywhere
Multiroom sound and multi person usage. Group and play, set to left/right for stereo pairs. Play all together. Or not. You choose.

Feel your music physically
It's been the Audio Pro focus since the beginning from 1978.  Better bass from small enclosures. Powered subwoofers is in their blood.  

 SPECIFICATIONS

• AMPLIFIER: 200W Digital class D
• LOW FREQUENCY DRIVER: 6.5” long throw
• PASSIVE RADIATORS: 2 x 7.5"
• INPUT CONNECTORS: Wi-fi + RCA in Wireless Auto Connect for simple setup
• FREQUENCY: 30 - 120 Hz
• VARIABLE CROSSOVER: 50-120Hz
• NETWORK COMPATIBILITY: 802.11 b/g/n, 2.4 GHz Only
• AUDIO FORMATS: MP3, WMA, AAC, FLAC, Apple Lossless
• DIMENSIONS: 230 mm  x 230 mm x 230 mm

DESCRIPTION

The SW series of subwoofers offer a level of performance previously unheard of in their class. Revolutionary drive units, amplifier modules and filter stages feature on every model. They strike the perfect balance between power and sound quality, offering remarkable sound pressure levels, yet retaining enough control to be considered audiophile in quality.

DESIGN

Solid, well-engineered power amplifiers, dedicated to the production of low-frequency energy are used across the range. Power is targeted specifically at the most important section of the bass spectrum, with very little loss and a controlled roll-off allowing for superb integration with all hi-fi and home cinema systems. The filter section controls the integration with your main speakers and ensures the transition is seamless. Designed using six discrete circuits, signal purity is regarded as paramount. Each circuit has a different crossover frequency (35Hz to 85Hz in 10Hz steps). The filter is 12dB/octave on the SW-150 and 24dB/octave on the larger models. In each model, it is possible to switch off all filters and allow the AV processor to control the effective frequency range of the subwoofer. This is preferable in high-end systems.

SOUND

Finally, the Tri-lam cone is revolutionary in terms of technology and performance. Detailed elsewhere in this brochure, it is one of the most advanced cones ever seen in a moving-coil loudspeaker, coupled with an elongated voice coil with a maximum excursion of 24mm.

SPECIFICATIONS

Astonishing presence

Designed to seamlessly integrate with the Tribe Series and immerse the listener in a totally realistic 3D sonic experience, the Tribe In-Wall Sub redefines exactness, speed and musicality. For easy use under any conditions, the Tribe In-Wall Sub performs with astonishing presence, no matter the size of your space.

Tribe Sub Double 8 In-Wall

The Tribe Sub Double 8 In-Wall incorporates 2 active drivers with stiff ballistic carbon fiber cones. The double drivers have been designed to function without passive radiators permitting a much smaller footprint and grill opening.

Astonishing presence

Designed to seamlessly integrate with the Tribe Series and immerse the listener in a totally realistic 3D sonic experience, the Tribe In-Wall Sub redefines exactness, speed and musicality. For easy use under any conditions, the Tribe In-Wall Sub performs with astonishing presence, no matter the size of your space.

Tribe Sub 12 In-Wall

The Tribe Sub 12 In-Wall incorporates a high power 12 inch driver, featuring a flat sandwich cone design and a 5.25 inch voice coil. Quick, smooth and articulate, the 12 inch active driver has been specially designed to function in tandem with the passive radiator, permitting quickness, incredible energy flow and unparalleled in-wall musicality.

Total ease

The Totem Storm Sub is one of the most flexible high-performance subwoofers available. The Storm Sub shares external cone topography and material with the two flanking passive units, resulting in a more informative and less compressed energy flow. Designed mostly for cinema/surround applications, the Storm Sub is very comfortable in a stereo or multi-channel audio environment.

The Storm Sub offers automatic power-down, its amplifier going into standby when signal is absent and reactivating automatically on signal reception. Other features include volume adjustment, variable phase dial, a pair of low-level RCA inputs and a crossover enabling/disabling switch to use low frequency management and control from processor.

Design features

• 8” active diver / (2) 8” passive radiators for precise articulation and bass extension
• Internal crossover offers a seamless blend to our loudspeakers
• Detachable power cord and isolation feet included
• Designed for A/V stereo applications
• Slow burn fuse protection

Technical features

• Full mono-shell hand-assembled chassis
• Lock mitered cabinet joints
• Exclusive, 300 watts integrated amplifier
• High/low pass audio connections for extreme flexibility
• Variable gain / phase / frequency adjustments for pinpoint accuracy

Expressive power

Totem’s KIN Sub provides a magnetically responsive and musically pleasing foundation wherever bass support is desired. Articulate and precise across a full range of frequencies, it is clear and coherent in all applications. In such a small package its dynamic capabilities are truly remarkable. The thightly sealed cabinet further expands placement potential.

Packed into an ultra small footprint, the KIN Sub’s refined technology comes on strong with hefty performance and scale. In nearly all scenarios it’s ideally suited for discreet bass augmentation. Already flexible for use across a wide range of adaptations, the angled front face enhances options either for small scale desktop duty or full scale in room support.

Design features

• Fully sealed casing for any conceivable placement
• ½ cubic foot in volume
• Exquisite cabinet design and finish (satin white or satin black)
• Sturdy anti-skid aluminum feet included
• Magnetic grill

Technical features

• Full 8-inch carbon fiber cone
• Extreme performance driver
• Full phase (0-180) adjustability
• Extended frequency ability
• Outstanding dynamic performance and bass extension (-3 dB - 29 Hz)
• Hi/low pass audio connections for full flexibility
• Crossover bypass

Feel the bass. Feel the beat. Feel the rhythm.

Packing a serious punch, the KIN Mini SUB delivers a rich, full and deep bass that will shake you up. Small in size yet big in sound, this ultra compact, tremendously powerful subwoofer comes is the perfect complement to its kinship, the awesome KIN Mini for extra bass extension. With its fabulous all-axis response, the KIN Mini SUB behaves with full responsiveness, wherever its room placement.

Exempt from any undesirable booming effect with its adjustable volume, frequency and phase dial, the KIN Mini Sub delivers precise and articulate bass to complement and enrich any type of music. Built to the highest standards, the KIN Mini SUB’s sealed cabinet offers outstanding benefits in terms of its phase response, timing and speed. Along with its ability to be placed anywhere, it delivers its total immersive musical capability with total accuracy. Whatever your listening angle, the KIN Mini SUB's unique acoustic proprieties project a solid-as-a-rock soundstage image.

Design features

• Sealed cabinet for flexible and “absolutely anywhere” placement
• 4-liter internal volume
• Angled front face for added room presence
• Satin white and satin black finish
• Removable power cord
• Extruded aluminum decoupling feet with anti-skid couplers
• Magnetic grill

Technical features

• Built-in 110-watt peak RMS high efficiency amplifier
• 32 Hz to 350 Hz frequency response
• Signal sensing auto turn/off button with full energy efficient specifications
• Switch for 120V or 220V utilization
• High-pass speaker input
• High excursion 6" ballistic carbon-fiber woofer
• Line level (RCA stereo & RCA LFE) inputs
• Adjustable (50 Hz to 350 Hz) low-pass crossover
• Variable volume control with 0° to 180° adjustable phase control

The magnificent F3-12 is Fyne’s state-of-the-art F300 series subwoofer featuring a massive 300mm (12”) multi-fibre cone driver, over half a kilowatt of DDX Direct Digital amplification and advanced DSP control with Bass Boost mode specifically for home cinema LFE. The heavily built, high rigidity MDF cabinet features a large down firing port, compliant floor coupling mounts and a raft of features including phase control, a 12V trigger, auto-sensing power on, and individual LFE/RCA inputs and filtering. The result is breath-taking bass performance as low as 28Hz, making the F3-12 the ideal super-sub for music and movies alike.

For full-blooded home cinema action, the F3-10 subwoofer mates a 475 Watt Direct Digital (DDX) amplifier with a 250mm (10”) driver in a mid-sized cabinet. Featuring advanced DSP technology, Bass Boost mode for LFE and a large, down-firing low-turbulence port for consistent in-room performance, the F3-10 is ideal for partnering with a wide range of home cinema speakers. With dedicated LFE and RCA inputs and filtering, phase control, a 12V trigger and continuous or auto-sensing power-on modes, the F3-10 brings the feature and performance of high-end subs at an affordable price.

Drop the bass! SLIM BASS 8 is a compact, active subwoofer from Wharfedale. Featuring a custom engineered, 200mm (8") long throw driver and high-power built-in amplifier, capable of 400W peak power output. SLIM BASS 8 is set to deliver a new dimension to your home cinema experience with astounding bass impact, without breaking the bank.

Designed to be placed in tight spaces, under your sofa for instance, or against a side wall in an apartment or bedroom, this technologically advanced subwoofer has a depth of a mere 30cm, so you can find the space for it to spur your home cinema experience. Limited space, but unlimited bass!

Features:

• Slim Bass - Designed for under-the-sofa use or placement where space is considered. not only does this mean the SLIM BASS 8 offers amazing low-frequency extension, it means you don't need tocrank the volume to feel the bass! Don't annoy the neighbours but still enjoy your movies!
• Music, games, movies - The onboard DSP ensures the SLIM BASS 8 handles low-frequencies with precision, whether you're enjoying music, playing video games or relaxing with a movie.
• High Power - The built-in amplifier is optimised for high impact at low frequencies. ideal for movies or music.
• Designed to Rumble - Specially engineered paper cone with increased self-damping properties, improved transit impact and in turn, an increased structural rigidity of the cone itself for a fuller performance.
• Cool in tight spaces - Copper lined vents not only reduce the magnetic distortion, they also help improve heat dissipation, keeping things cool!

Specifications:

• General description - Active dynamic-drive IB subwoofer system.
• Design philosophy and core technology - 1 x (8") 200mm cone long-throw
• TRansducer complement - 200mm long throw bass driver
• Input sensitivity - 200mv for maxomum output
• Amplifier power output - 200W
• Peak Power Output - 400W
• Peak SPL - 108dB
• Frequency Response (+/- 3dB) - 35Hz ~ 120Hz
• Bass extension - (-6dB) - 30Hz
• Crossover frequency - 100Hz ~ 150Hz
• Signal-to-noise ratio (S/N) - >85dB
• Special features - Phase inversion, variable filter slope, high pass output, low pass filter slope adjustment, Auto on/off
• Dimensions (HxWxD) - (170+19) x 601 x 305mm
• Net weight - 11kg
• Finish - Black sandex
• Power requirement - 110V/230V (50~60Hz)
• Standard accessories - power cord, spikes, user manual, certificate

Impressively deep bass output from a powerful subwoofer with a beautiful exterior.

• Advanced YST II (Yamaha Active Servo Technology II)
• 25cm (10”) F.B.P. (Fiber Blend Paper) diaphragm with diecast aluminium frame
• 600W high performance digital amplifier built in
• Twin wooden Linear Ports
• Heavy-duty construction
• Three Bass Modes (wide, normal and narrow)
• Three memory presets
• Continuously variable high cut filter
• Full-function remote control unit
• Sleep timer

Advanced YST II (Yamaha Active Servo Technology II)

Yamaha's Advanced YST II (Yamaha Active Servo Technology II) combines negative-impedance and constant-current principles to drive the speaker cone with extremely tighter control. Using Advanced Negative Impedance Converter (ANIC) circuits, this system dynamically optimizes effective speaker impedance to maintain excellent linearity. This means more stable and accurate low range response, not to mention higher sound pressure levels. This means more stable and accurate low range response, higher sound pressure levels, and the ability to reproduce clear bass without muddiness.

600 W High Output Power and 25 cm (10”) F.B.P. (Fiber Blend Paper) Diaphragm

The NS-SW901 derives its bass thrust from a built-in 600 W digital amplifier. Featuring Yamaha’s exclusive Power Engine chipset, it uses a constant gain PLL modulator circuit, a cross feedback loop circuit, an Active Power Control system, a highly efficient power supply and the highest quality parts. It delivers exceptionally high levels of power and sound quality, yet with low power consumption and compact size. The 25 cm (10”) cone diaphragm is made of Yamaha developed F.B.P., which is paper with a blend of carbon fibers and aramid fibers. Its extreme stiffness and extra-long stroke prevent distortion from occurring even during large, deep bursts of sound.

Twin Wooden Linear Ports

The wooden ports are carved from a block of alder wood and aesthetically match the enclosure, the twin ports provide more port area without increasing the subwoofer’s size, as one large port would do. The shape is based on a natural logarithm to prevent extraneous wind noise.

Heavy-Duty Construction with Three-Way Mitered-Joint Construction

The NS-SW901 employs three-way mitered-joint construction at the cabinet corners and baffle/body connections to increase the tightness of the joints so the entire cabinet behaves as a single unit. This improves low frequency response and reduces unwanted vibration. A thick baffle (37mm; 1-1/2”) also minimizes vibration, adding to the overall benefits of the stiff cabinet construction.

Yamaha Piano Black Finish

The glossy, lustrous finish is applied using the same techniques developed by Yamaha over many decades of manufacturing beautiful grand pianos.

Full-Function Remote Control Unit

The remote unit makes it convenient to operate the subwoofer. It lets the user turn the power on and off, adjust the volume, adjust the high cut filter, select phase (normal/reverse), select BASS mode, engage the sleep timer and set and select the preset memories.

Utilizing a precisely-engineered switching power supply, the SA-600W is capable of efficiently generating unclipped output voltages equivalent to 600 watts of RMS power, while remaining calm and stable. Managing all of the SA-600W’s on-board features is an intuitively designed interface for adjusting all settings and controls with ease.

The SA-600W includes the following features:
• Intuitive interface with LCD display provides detailed control of on-board settings and functions
• Pristine, stereo audio circuit pathways used throughout
• On-board, 2-way active crossover (12/24 dB per octave), capable of supporting a conventional 2-channel audio system with a low-pass filtered subwoofer output and high-pass filtered outputs to feed the main speakers’ amplifier
• Built-in, optimized equalizer curves for use with JL Audio subwoofers systems
• Fixed or variable level control options
• Selectable polarity control (0 or 180 degrees) to optimize subwoofer integration
• Programmable time delay control added to the SA-600W’s subwoofer outputs and auxiliary outputs.
• E.L.F. (Extreme Low Frequency) trim applies equalizer cut or boost at 25 hertz (-12 to + 3 dB) to tailor a subwoofer’s response for a particular room.
• Innovative D.A.R.O. (Digital Automatic Room Optimization) technology designed to offset poor room acoustics (requires optional JL Audio calibration microphone – sold separately)
• Three on-board equalizer bands with configurable frequency range, gain range and Q range to optimize in-room response
• Grounded or Isolated input mode options for quiet, noise-free performance
• Stereo, high-level inputs accept direct connection from receivers equipped with speaker level outputs only
• Automatic turn-on options via signal sensing or 12V trigger
• 12V input and output triggers to control additional SA-600Ws or peripheral equipment
• Front-mounted USB port and DFU button provides easy access to update firmware
• Versatile mounting options for table-top setups or rack-mount installations
• Wireless input capability when used with a JLINK™ TRX System (sold separately) 

CR-1: Active Subwoofer Crossover

The lucky few who have heard a well-integrated subwoofer in a great audio system know that the subwoofer's effect is profound. While everyone expects the bass extension to improve, most are shocked at the transformation that occurs in the main speakers. They simply open up, delivering improved dynamics, superior imaging and more low-level detail. Many describe it as the greatest speaker upgrade they have ever made.

Over the years, we have calibrated many subwoofer systems in highly critical listening environments, and we have been frustrated by the limitations of active crossovers we have worked with. Tired of struggling with "blunt instruments", we felt that a higher precision tool was needed, so we decided to build it and call it "CR-1". When properly set up, CR-1 creates a listening experience in which the subwoofers and main speakers become one, delivering a cohesive and compelling sonic presentation.

The CR-1 Active Subwoofer Crossover has been designed by audiophiles, for audiophiles. We believe it has no equal, offering a powerful combination of subwoofer/satellite tuning features, and a complete commitment to analog signal purity.

CR-1 is built around two banks of precision Linkwitz-Riley low-pass and high-pass filters. Multiplying DACs with monolithic ratio matching are employed to adjust the analog circuit's filter frequencies. This offers superior tracking behavior and far more precise left/right channel balance, compared to conventional approaches.

Another of CR-1's unique and powerful features is a pair of rotary controls that control the damping of each filter bank. These damping controls dramatically improve the acoustic summing through the crossover region, by compensating for each speaker system's frequency response. At the center of the front panel, a single intuitive, rotary control permits quick adjustment of the relative level between the subwoofer(s) and main speakers.

To minimize distortion and noise, CR-1 employs top-grade component parts in its all-analog audio circuitry: 1% precision resistors, JFET-input audio-grade op-amps, polypropylene film-and-foil capacitors and metallized-polypropylene film capacitors, to name just a few.

CR-1's input-output design makes it equally adaptable to studio, mastering suite or audiophile two-channel playback environments. To accommodate dual-mode systems, we also include a bypass feature that engages a pass-through from a dedicated "Managed Bass Input" on the rear panel, to the CR-1's subwoofer outputs. This makes it convenient to switch from two-channel to multi-channel mode.

CR-1 is the ultimate tool for subwoofer integration.

Fathom® ICS-SYS-108
8-inch (200 mm) In-Ceiling Powered Subwoofer System

In-Ceiling Subwoofer System with Single 8-inch Subwoofer Driver, 300 watts

Created from the same innovative technologies used to develop our free-standing powered subwoofers, the Fathom® ICS in-ceiling subwoofer systems are engineered to deliver outstanding bass performance, with nearly unlimited placement freedom.

Purpose-built to disappear into the ceilings of most home audio/theater environments, the 8-inch Fathom® ICS systems are designed to fit 2" x 6" or larger ceiling joists and a wide range of assembled joist widths, while operating through very small grilles. The grille’s clever design accommodates all common drywall thicknesses and can be easily painted to match a room’s decor.

The subwoofer enclosures utilize extensive architectural features aimed at improving rigidity while keeping a very low profile and minimal wall thickness. A unique port design vents through a slot located at the perimeter of the driver mount to enhance efficiency and low-bass output. Inside the enclosure is a long-excursion, 8-inch thin-line woofer, built to exacting standards by JL Audio for the Fathom® ICS products.

Each 8-inch Fathom® ICS system is driven by a rack-mountable amplifier with up to 600 watts of clean power, programmed specifically for each system, and capable of driving up to two enclosures. A complete set of Fathom® signal processing features is also onboard, including our powerful, 18-band Digital Automatic Room Optimization (D.A.R.O.) system, and high-pass crossover outputs, all accessible via an easy-to-use, menu-driven interface and LCD display. Note: D.A.R.O. functionality requires optional calibration microphone (sold separately).

The ICS-108 System fits 2" x 6" ceiling joists or larger, with assembled joists ranging from 16-inches to 25 1/2-inches on center. Consult your Authorized JL Audio Dealer for specific application information.

Enclosure Finish: Flat Black (hidden from view when installed)

Grille finish: Primer White (paintable)

Enclosure Construction: CNC-Cut Birch Plywood

2 x 6-inch Joist/Stud Enclosure Physical Specifications

Fathom® IWS-SYS-208
Dual 8-inch (200 mm) In-Wall Powered Subwoofer System

In-Wall Subwoofer System with Dua8-inch Subwoofer Driver, 600 watts

Born from the same groundbreaking technologies used to develop our free-standing powered subwoofers, the Fathom® IWS in-wall subwoofer systems deliver remarkable bass performance, while remaining largely concealed within most home audio/theater environments.

The 8-inch Fathom® IWS systems are smaller and easier to integrate than our larger in-wall Fathoms, fitting in all standard, 16-inch, on-center stud openings, and operating through very small grilles. These grilles accommodate all common drywall thicknesses, and can be easily painted to match the wall.

The subwoofer enclosures utilize extensive architectural features aimed at improving rigidity while keeping a very low profile and minimal wall thickness. A unique port design vents through a slot located at the perimeter of the driver mount to enhance efficiency and low-bass output. Inside the enclosure is a long-excursion, 8-inch thin-line woofer, built to exacting standards by JL Audio for the Fathom® IWS products.

Each 8-inch Fathom® IWS system is powered by a rack-mountable amplifier, capable of generating up to 600 watts of clean power and can drive up to two enclosures. A complete set of Fathom® signal processing features is also onboard, including our powerful, 18-band Digital Automatic Room Optimization (D.A.R.O.) system, all managed via an easy-to-use, menu-driven interface and LCD display. Note: D.A.R.O. functionality requires optional calibration microphone (sold separately).

The IWS-108 System fits 2" x 4" wall studs or larger. Consult your Authorized JL Audio Dealer for specific application information.

Enclosure Finish: Flat Black (hidden from view when installed)

Grille finish: Primer White (paintable)

Enclosure Construction: CNC-Cut Birch Plywood

General Specifications

Fathom® IWS-SYS-108
8-inch (200 mm) In-Wall Powered Subwoofer System

In-Wall Subwoofer System with Single 8-inch Subwoofer Driver, 300 watts 

Born from the same groundbreaking technologies used to develop our free-standing powered subwoofers, the Fathom® IWS in-wall subwoofer systems deliver remarkable bass performance, while remaining largely concealed within most home audio/theater environments.

The 8-inch Fathom® IWS systems are smaller and easier to integrate than our larger in-wall Fathoms, fitting in all standard, 16-inch, on-center stud openings, and operating through very small grilles. These grilles accommodate all common drywall thicknesses, and can be easily painted to match the wall.

The subwoofer enclosures utilize extensive architectural features aimed at improving rigidity while keeping a very low profile and minimal wall thickness. A unique port design vents through a slot located at the perimeter of the driver mount to enhance efficiency and low-bass output. Inside the enclosure is a long-excursion, 8-inch thin-line woofer, built to exacting standards by JL Audio for the Fathom® IWS products.

Each 8-inch Fathom® IWS system is powered by a rack-mountable amplifier, capable of generating up to 600 watts of clean power and can drive up to two enclosures. A complete set of Fathom® signal processing features is also onboard, including our powerful, 18-band Digital Automatic Room Optimization (D.A.R.O.) system, all managed via an easy-to-use, menu-driven interface and LCD display. Note: D.A.R.O. functionality requires optional calibration microphone (sold separately).

The IWS-108 System fits 2" x 4" wall studs or larger. Consult your Authorized JL Audio Dealer for specific application information.

Enclosure Finish: Flat Black (hidden from view when installed)

Grille finish: Primer White (paintable)

Enclosure Construction: CNC-Cut Birch Plywood

Fathom® IWSv2-SYS-213
Dual 13.5-inch (345 mm) In-Wall v2 Powered Subwoofer System

In-Wall Subwoofer System with Dual 13.5-inch Subwoofer Drivers, 2000 watts

The same minds that engineered JL Audio’s reference-grade Fathom® and Gotham® powered subwoofers have created an amazing in-wall subwoofer solution, centered on a pair of innovative, thin-line drivers with groundbreaking technologies.

Housing these exotic drivers are two critically engineered enclosures with a unique floating mount design to minimize wall excitation. The enclosures feature extensive architectural features aimed at improving rigidity while keeping a very low profile and minimal wall thickness.

A paintable, fine steel-mesh grille, also designed to control vibration, is included for each enclosure in the system.

The IWSv2-SYS-213 is driven by a rack-mountable, purpose-tuned amplifier, capable of delivering up to 2 kW of clean power, and armed with serious processing features, including our latest Digital Automatic Room Optimization system.

There is no need to lower your expectations when selecting this remarkable in-wall solution... it's a real Fathom®.

The IWSv2-SYS-213 is available to fit a variety of 2" x 4" and 2" x 6" wall studs. Consult your Authorized JL Audio Dealer for specific application information.

Enclosure Finish: Flat Black (hidden from view when installed)

Grille finish: Primer White (paintable)

Enclosure Construction: CNC-Cut Birch Plywood

Fathom® IWSv2-SYS-113
13.5-inch (345 mm) In-Wall v2 Powered Subwoofer System

In-Wall Subwoofer System with Single 13.5-inch Subwoofer Driver, 1000 watts

The same minds that engineered JL Audio’s reference-grade Fathom® and Gotham® powered subwoofers have created an amazing in-wall subwoofer solution, centered on an innovative, thin-line driver with groundbreaking technologies.

Housing this exotic driver is a critically engineered enclosure with a unique floating mount design to minimize wall excitation. The enclosure features extensive architectural features aimed at improving rigidity while keeping a very low profile and minimal wall thickness.

A paintable, fine steel-mesh grille, also designed to control vibration, is included for each enclosure in a system.

The IWSv2-SYS-113 is driven by a rack-mountable, purpose-tuned amplifier, capable of delivering up to 1 kW of clean power, and armed with serious processing features, including our acclaimed Digital Automatic Room Optimization system.

There is no need to lower your expectations when selecting this remarkable in-wall solution... it's a real Fathom®.

The IWSv2-SYS-113 is available to fit a variety of 2" x 4" and 2" x 6" wall studs. Consult your Authorized JL Audio Dealer for specific application information.

Enclosure Finish: Flat Black (hidden from view when installed)

Grille finish: Primer White (paintable)

Enclosure Construction: CNC-Cut Birch Plywood

General Specifications

Signal Processing

Purpose-built to reproduce powerful low-frequency events with stunning impact and precision, the Dominion™ driver employs JL Audio’s exclusive DMA (Dynamic Motor Analysis) technology to produce higher output levels with reduced distortion, as well as improved dynamic tracking and resolution. As a result, Dominion™ subwoofers are capable of peak-to-peak excursions well in excess of 2.5-inches (63 mm – d108), and 2.7 inches (68 mm – d110), without distress or audible distortion.

Dominion™ amplifiers utilize an advanced Class D design in order to extract the most from the long-excursion driver platform. This design features a tightly regulated switching power supply, allowing the amplifier to generate prodigious amounts of unclipped output voltages. These technologies ensure that the Dominion™ powered subwoofers remain in their comfort zone, which is well beyond the point where most small subwoofers run out of power or driver capability.

With a host of signal processing features included, Dominion™ powered subwoofers can be integrated into most systems with ease. Low-pass signals are precisely guided, thanks to the onboard crossover’s 24 dB/octave Linkwitz-Riley alignment. Phase and polarity controls are onboard to aid in achieving the optimal acoustic transition between the subwoofer(s) and main speakers. Flexible input options are on-hand to accept either line-level or speaker-level signals. Connect a JLINK™ TRX system (sold separately) to the onboard Wireless Link port and enjoy the freedom to position your Dominion™ almost anywhere, up to 100 feet (30 meters) away from your source unit.

To contain the immense pressures created by the Dominion™ driver, each beautiful cabinet is carefully engineered and constructed using solid, CNC-cut, MDF material with extensive internal bracing and advanced assembly techniques. All Dominion™ powered subwoofers are built with pride and precision in JL Audio’s U.S. factory to deliver years of listening enjoyment.

SPECIFICATIONS

General Specifications
Enclosure Type: Sealed
Frequency Response (Anechoic): 27 – 111 Hz (±1.5dB)
-3 dB at 25 Hz / 118 Hz
-10 dB at 21 Hz / 143 Hz
Effective Piston Area (Sd): 48.71 sq in / 0.0314 sq m
Effective Displacement: 127 cu in / 2.08 L
Amplifier Power: 750 W RMS short-term
Power Mode: Automatic (Signal-Sensing)
Light Modes: N/A

Signal Processing
Unbalanced Inputs: Stereo or Mono (two RCA jacks)
Balanced Inputs: N/A
Speaker/High-Level Inputs: Stereo or Mono (removeable plug)
Input Grounding: Isolated or Grounded
Input Modes: N/A
Level Control: Variable, from full mute to +15dB over reference gain
Filter Mode(s): Low-Pass
Filter Slope(s): 24 dB/octave
Filter Frequency Range: 25 Hz – 130 Hz
Filter Defeat Function: Yes
Polarity: 0 or 180 degrees
Phase: Variable, 0- 280 degrees, referenced to 80 Hz
Extreme Low Frequency (E.L.F.) Trim: N/A
Line Outputs: N/A
Output to Slave: N/A
Calibration Mode: N/A

Physical Specifications
Width (W): 12 in / 305 mm
Height (H): 13.4 in / 340 mm
Depth (D): 15.86 in / 403 mm
Net Weight: 38.2 lb / 17.3 kg
Note: Height dimensions include feet. Depth dimensions include grilles.

Purpose-built to reproduce powerful low-frequency events with stunning impact and precision, the Dominion™ driver employs JL Audio’s exclusive DMA (Dynamic Motor Analysis) technology to produce higher output levels with reduced distortion, as well as improved dynamic tracking and resolution. As a result, Dominion™ subwoofers are capable of peak-to-peak excursions well in excess of 2.5-inches (63 mm – d108), and 2.7 inches (68 mm – d110), without distress or audible distortion.

Dominion™ amplifiers utilize an advanced Class D design in order to extract the most from the long-excursion driver platform. This design features a tightly regulated switching power supply, allowing the amplifier to generate prodigious amounts of unclipped output voltages. These technologies ensure that the Dominion™ powered subwoofers remain in their comfort zone, which is well beyond the point where most small subwoofers run out of power or driver capability.

With a host of signal processing features included, Dominion™ powered subwoofers can be integrated into most systems with ease. Low-pass signals are precisely guided, thanks to the onboard crossover’s 24 dB/octave Linkwitz-Riley alignment. Phase and polarity controls are onboard to aid in achieving the optimal acoustic transition between the subwoofer(s) and main speakers. Flexible input options are on-hand to accept either line-level or speaker-level signals. Connect a JLINK™ TRX system (sold separately) to the onboard Wireless Link port and enjoy the freedom to position your Dominion™ almost anywhere, up to 100 feet (30 meters) away from your source unit.

To contain the immense pressures created by the Dominion™ driver, each beautiful cabinet is carefully engineered and constructed using solid, CNC-cut, MDF material with extensive internal bracing and advanced assembly techniques. All Dominion™ powered subwoofers are built with pride and precision in JL Audio’s U.S. factory to deliver years of listening enjoyment.

SPECIFICATIONS

General Specifications
Enclosure: Type Sealed
Frequency Response (Anechoic): 31 – 112 Hz (±1.5dB)
-3 dB at 29 Hz / 119 Hz
-10 dB at 21 Hz / 143 Hz
Effective Piston Area (Sd): 32.18 sq in / 0.0208 sq m
Effective Displacement: 80 cu in / 1.3 L
Amplifier Power: 500 W RMS short-term
Power Mode: Automatic (Signal-Sensing)
Light Modes: N/A

Signal Processing
Unbalanced Inputs: Stereo or Mono (two RCA jacks)
Balanced Inputs: N/A
Speaker/High-Level Inputs: Stereo or Mono (removeable plug)
Input Grounding: Isolated or Grounded
Input Modes: N/A
Level Control: Variable, from full mute to +15dB over reference gain
Filter Mode(s): Low-Pass
Filter Slope(s): 24 dB/octave
Filter Frequency Range: 25 Hz – 130 Hz
Filter Defeat Function: Yes
Polarity: 0 or 180 degrees
Phase: Variable, 0- 280 degrees, referenced to 80 Hz
Extreme Low Frequency (E.L.F.) Trim: N/A
Line Outputs: N/A
Output to Slave: N/A
Calibration Mode: N/A

Physical Specifications

Width (W): 10 in / 254 mm
Height (H): 11.37 in / 289 mm
Depth (D): 13.23 in / 336 mm
Net Weight: 26.4 lb / 12 kg

Note: Height dimensions include feet. Depth dimensions include grilles.

E-Sub e112
12-inch (300 mm) Powered Subwoofer, Black Ash Finish & Black Gloss

E-Sub drivers employ our exclusive DMA technology to optimize the drivers’ motor strength, ensuring linear behavior over a very long excursion range. Unlike typical steady-state modeling systems, DMA takes into account the dynamic shifts created by current flow and back EMF under real power conditions, with real program material. The payoff offered by DMA optimization is a driver that faithfully tracks its input signal, at all listening levels, leading to superior bass definition and dynamics.

The extreme mounting depth of the E-Sub driver is very deliberate. It permits wide gaps to exist between the three suspension elements (the rubber surround and the dual spiders), imparting exceptional mechanical stability over the driver’s full excursion range. This further improves linearity, reduces distortion and enhances long-term reliability. In a stroke of engineering elegance, the E-Sub’s steel front mounting flange forms the entire front baffle of the finished product, while the driver’s back-plate is threaded and bolted to the rear wall of its enclosure for support.

To power these innovative drivers, we engineered a completely new switching amplifier with a regulated, switching power supply, making its chassis more compact, lightweight and efficient, while still delivering ample, clean power to fully exercise the E-Sub driver’s performance envelope.

Conveniently controlled from the E-Sub cabinet’s top panel, the amplifier incorporates studio-grade signal processing to make adjustments a much more enjoyable experience than rear–mounted controls found on most powered subwoofers. An attractive cover hides and protects the controls during normal use.

The feature set has been designed to allow the use of E-Subs in a wide range of applications, from full home theater systems to dedicated two-channel music systems, to desktop audio workstations. Analog inputs are provided for unbalanced line-level signals or speaker level signals. Dedicated line outputs are included to make a bi-amped system arrangement with no additional hardware required. Useful in combating ground-related noise problems, a rear panel switch configures the line level inputs as grounded or isolated.

The E-Sub’s active crossover is a true two-way, 4th order Linkwitz-Riley design, with a low-pass filter feeding the subwoofer’s amplifier and a high-pass filtered signal exiting its line outputs. When the on-board crossover is defeated, as is typical in a home theater installation, the line outputs deliver a pass-through, buffered signal identical to its line inputs, easily permitting multiple E-Subs to be interconnected in a ‘daisy-chain’ arrangement. Switchable polarity and a fully variable phase control round out the signal processing section. All signal processing is performed in the analog domain, ensuring very low latency in critical applications.

Precision-built in JL Audio’s U.S. factory, all E-Sub are individually performance-verified and tested to deliver years of listening enjoyment in your home audio or home theater system.

SPECIFICATIONS

General Specifications
Enclosure: Type Sealed
Frequency Response (Anechoic): 22 – 118 Hz (±1.5dB)
-3 dB at 21 Hz / 120 Hz
-10 dB at 17 Hz / 153 Hz
Effective Piston Area (Sd): 84.4 sq in / 0.0545 sq m
Effective Displacement: 235 cu in / 3.9 L
Amplifier Power: 1500 W RMS short-term
Power Mode(s): Off, On or Automatic (Signal-Sensing)
Light Modes: N/A

Signal Processing
Unbalanced Inputs: Stereo or Mono (two RCA jacks)
Balanced Inputs: N/A
Speaker/High-Level Inputs: Stereo or Mono (removeable plug)
Input Grounding: Isolated or Grounded
Input Modes: N/A
Level Control: Variable, from full mute to +15dB over reference gain
Filter Mode(s): Low-Pass
Filter Slope(s): 24 dB/octave
Filter Frequency Range: 25 Hz – 130 Hz
Filter Defeat Function: Yes
Polarity: 0 or 180 degrees
Phase: Variable, 0- 280 degrees, referenced to 80 Hz
Extreme Low Frequency (E.L.F.) Trim: N/A
Line Outputs: Stereo or Mono (two RCA jacks), High-Pass or Pass-Through
Output to Slave: N/A
Calibration Mode: N/A

Physical Specifications
Width (W): 15.5 in / 394 mm
Height (H): 16.23 in / 412 mm
Depth (D): 18.39 in / 467 mm
Net Weight: 73.5 lb / 33.3 kg
Note: Height dimensions include feet.

E-Sub e110
10-inch (250 mm) Powered Subwoofer, Black Gloss Finish & ASH Black Finish

E-Sub drivers employ our exclusive DMA technology to optimize the drivers’ motor strength, ensuring linear behavior over a very long excursion range. Unlike typical steady-state modeling systems, DMA takes into account the dynamic shifts created by current flow and back EMF under real power conditions, with real program material. The payoff offered by DMA optimization is a driver that faithfully tracks its input signal, at all listening levels, leading to superior bass definition and dynamics.

The extreme mounting depth of the E-Sub driver is very deliberate. It permits wide gaps to exist between the three suspension elements (the rubber surround and the dual spiders), imparting exceptional mechanical stability over the driver’s full excursion range. This further improves linearity, reduces distortion and enhances long-term reliability. In a stroke of engineering elegance, the E-Sub’s steel front mounting flange forms the entire front baffle of the finished product, while the driver’s back-plate is threaded and bolted to the rear wall of its enclosure for support.

To power these innovative drivers, we engineered a completely new switching amplifier with a regulated, switching power supply, making its chassis more compact, lightweight and efficient, while still delivering ample, clean power to fully exercise the E-Sub driver’s performance envelope.

Conveniently controlled from the E-Sub cabinet’s top panel, the amplifier incorporates studio-grade signal processing to make adjustments a much more enjoyable experience than rear–mounted controls found on most powered subwoofers. An attractive cover hides and protects the controls during normal use.

The feature set has been designed to allow the use of E-Subs in a wide range of applications, from full home theater systems to dedicated two-channel music systems, to desktop audio workstations. Analog inputs are provided for unbalanced line-level signals or speaker level signals. Dedicated line outputs are included to make a bi-amped system arrangement with no additional hardware required. Useful in combating ground-related noise problems, a rear panel switch configures the line level inputs as grounded or isolated.

The E-Sub’s active crossover is a true two-way, 4th order Linkwitz-Riley design, with a low-pass filter feeding the subwoofer’s amplifier and a high-pass filtered signal exiting its line outputs. When the on-board crossover is defeated, as is typical in a home theater installation, the line outputs deliver a pass-through, buffered signal identical to its line inputs, easily permitting multiple E-Subs to be interconnected in a ‘daisy-chain’ arrangement. Switchable polarity and a fully variable phase control round out the signal processing section. All signal processing is performed in the analog domain, ensuring very low latency in critical applications.

Precision-built in JL Audio’s U.S. factory, all E-Sub are individually performance-verified and tested to deliver years of listening enjoyment in your home audio or home theater system.

SPECIFICATIONS

General Specifications
Enclosure Type: Sealed
Frequency Response (Anechoic): 25 – 116 Hz (±1.5dB)
-3 dB at 23 Hz / 120 Hz
-10 dB at 18 Hz / 165 Hz
Effective Piston Area (Sd): 58.78 sq in / 0.0379 sq m
Effective Displacement: 131 cu in / 2.1 L
Amplifier Power: 1200 W RMS short-term
Power Mode(s): Off, On or Automatic (Signal-Sensing)
Light Modes: N/A

Signal Processing
Unbalanced Inputs: Stereo or Mono (two RCA jacks)
Balanced Inputs: N/A
Speaker/High-Level Inputs: Stereo or Mono (removeable plug)
Input Grounding: Isolated or Grounded
Input Modes: N/A
Level Control: Variable, from full mute to +15dB over reference gain
Filter Mode(s): Low-Pass
Filter Slope(s): 24 dB/octave
Filter Frequency Range: 25 Hz – 130 Hz
Filter Defeat Function: Yes
Polarity: 0 or 180 degrees
Phase: Variable, 0- 280 degrees, referenced to 80 Hz
Extreme Low Frequency (E.L.F.) Trim: N/A
Line Outputs: Stereo or Mono (two RCA jacks), High-Pass or Pass-Through
Output to Slave: N/A
Calibration Mode: N/A

Physical Specifications
Width (W): 13.5 in / 343 mm
Height (H): 14.24 in / 362 mm
Depth (D): 16.51 in / 419 mm
Net Weight: 52.7 lb / 23.9 kg
Note: Height dimensions include feet.

Fathom® f212v2-GLOSS
Dual 12-inch (300 mm) Powered Subwoofer, Black Gloss Finish

The combination of dual ultra-long throw W7 12-inch drivers and a very powerful switching amplifier give it jaw-dropping performance capabilities at any listening level.

Because it is built with the same driver and amplifier technology as our flagship Gotham®, the f212v2 delivers a tremendous level of sound quality. Low distortion, excellent dynamic capabilities and shockingly deep bass extension will allow you to experience all the excitement of the most demanding cinematic material, while also being able to reproduce all the nuance and texture of your most delicate musical material.

A complete set of signal processing features is easily accessible on the front surface of every Fathom. These include a highly flexible low-pass filter, variable phase, switchable polarity, e.l.f. trim and our powerful Digital Automatic Room Optimization (D.A.R.O.) system. A calibrated microphone is included for the D.A.R.O. system. Input connections are made via unbalanced RCA connections or balanced Neutrik® combo XLR/TRS jacks. Also included is an XLR output to connect a second Fathom® as a slave unit.

SPECIFICATIONS

General Specifications
Enclosure Type: Sealed
Enclosure Finish: Black Gloss
Frequency Response (Anechoic): 20 – 97 Hz (±1.5dB) -3 dB at 19 Hz / 110 Hz -10 dB at 15 Hz / 157 Hz
Effective Piston Area (Sd):168 sq in / 0.1084 sq m
Effective Displacement: 574 cu in / 9.4 L
Amplifier Power: 3.6 kW RMS short-term
Power Mode(s): Off, On or Automatic (Signal-Sensing)
Light Modes: Off, On or Dim

Signal Processing
Unbalanced Inputs: Stereo or Mono (two RCA jacks)
Balanced Inputs: Stereo or Mono (two female XLR jacks)
Speaker/High-Level Inputs: N/A
Input Grounding: Isolated or Grounded
Input Modes: Master or Slave
Level Control: Reference (fixed gain) or Variable, from full mute to +15dB over reference gain
Filter Mode(s): Low-Pass
Filter Slope(s): 12/24 dB/octave
Filter Frequency Range: 30 Hz – 130 Hz
Filter Defeat Function: Yes
Polarity: 0 or 180 degrees
Phase: Variable, 0 – 280 degrees
Extreme Low Frequency (E.L.F.) Trim: Variable, -12 dB to +3 dB at 25 Hz
Line Outputs: N/A
Output to Slave: Balanced (one male XLR jack)
Calibration Mode: Digital Automatic Room Optimization (D.A.R.O.), incudes laboratory-grade microphone

Physical Specifications
Width (W): 14.92 in / 379 mm
Height (H): 31.96 in / 812 mm
Depth (D): 20.39 in / 518 mm
Net Weight: 224 lb / 102 kg
Note: Height dimensions include feet.

Fathom® f113v2-GLOSS
13.5-inch (345 mm) Powered Subwoofer, Black Gloss Finish

The combination of an ultra-long throw W7 13.5-inch driver and a very powerful switching amplifier give it the kind of output normally associated with far larger subwoofer systems.

Because it is built with the same driver and amplifier technology as our flagship Gotham®, the f113v2 delivers a tremendous level of sound quality. Low distortion, excellent dynamic capabilities and shockingly deep bass extension will allow you to experience all the excitement of the most demanding cinematic material, while also being able to reproduce all the nuance and texture of your most delicate musical material.

A complete set of signal processing features is easily accessible on the front surface of every Fathom. These include a highly flexible low-pass filter, variable phase, switchable polarity, e.l.f. trim and our powerful Digital Automatic Room Optimization (D.A.R.O.) system. A calibrated microphone is included for the D.A.R.O. system. Input connections are made via unbalanced RCA connections or balanced Neutrik® combo XLR/TRS jacks. Also included is an XLR output to connect a second Fathom® as a slave unit.

SPECIFICATIONS

General Specifications
Enclosure Type: Sealed
Enclosure Finish: Black Gloss
Frequency Response (Anechoic): 20 – 86 Hz (±1.5dB) -3 dB at 18 Hz / 127 Hz -10 dB at 16 Hz / 154 Hz
Effective Piston Area (Sd): 107.35 sq in / 0.0693 sq m
Effective Displacement: 386 cu in / 6.3 L
Amplifier Power: 3000 W RMS short-term
Power Mode(s): Off, On or Automatic (Signal-Sensing)
Light Modes: Off, On or Dim

Signal Processing
Unbalanced Inputs: Stereo or Mono (two RCA jacks)
Balanced Inputs: Stereo or Mono (two female XLR jacks)
Speaker/High-Level Inputs: N/A
Input Grounding: Isolated or Grounded
Input Modes: Master or Slave
Level Control: Reference (fixed gain) or Variable, from full mute to +15dB over reference gain
Filter Mode(s): Low-Pass
Filter Slope(s): 12/24 dB/octave
Filter Frequency Range: 30 Hz – 130 Hz
Filter Defeat Function: Yes
Polarity: 0 or 180 degrees
Phase: Variable, 0 – 280 degrees
Extreme Low Frequency (E.L.F.) Trim: Variable, -12 dB to +3 dB at 25 Hz
Line Outputs: N/A
Output to Slave: Balanced (one male XLR jack)
Calibration Mode: Digital Automatic Room Optimization (D.A.R.O.), includes laboratory-grade microphone

Physical Specifications
Width (W): 16.50 in / 419 mm
Height (H): 19.25 in / 489 mm
Depth (D): 19.25 in / 489 mm
Net Weight: 133 lb / 60 kg
Note: Height dimensions include feet.