In-Wall Speakers

Vanishing V Series High Performance In-Wall Rectangular Speaker

• Klippel Distortion Optimization for perfect motor structure, voice coil alignment and suspension, delivering the best performance at any volume level.
• Virtually invisible installations with Polk’s Wafer-thin Sheer Grille™.
• Polk’s exclusive lightweight Dynamic Balance® Polypropylene Cones deliver spectacular midrange clarity, punchy bass and high efficiency.

SPECIFICATIONS

• Tweeter: 1” silk dome, swivel mount
• Woofer:  6.5” composite polymer
• Sensitivity:  90dB 
• Impedance:  8Ω 
• Freq. Response: 50-25,000Hz (-3dB)
• Power Handling:  10-125w
• Features:  Ideal match to Signature series, wafer-thin grille
• Overall Dimensions: 324mm H x 184mm W
• Cutout Dimensions: 324mm H x 184mm W

DESCRIPTION

The new WWS-65 in-wall speaker demonstrates Wharfedale’s lifetime lasting build, with a musically thrilling sound.

The edgeless exterior design on the WWS-65 with magnetic micro-perforated grilles guarantees a seamless blend between wall and speaker. While externally the speakers are simplistic and discreet, advanced drivers and crossover networks are housed within.

The rigid polypropylene LF cone paired with an ultra-durable, high-excursion rubber surround guarantees stability under high pressure and extensive bass output. Titanium dome tweeters with highly efficient neodymium motor systems complete each speakers’ wide frequency response with a scintillating high frequency and wide dispersion with a rotatable tweeter for optimised positioning.

. 

SPECIFICATIONS

 Woofer - 6.5 inch Polypropylene Cone

Tweeter - 1 inch PIVOTING Titanium Dome

Frequency Response - 63Hz - 20kHz 

Sensitivity - 88dB

Power Handling - 100 Watts

Nominal Impedance - 8 Ohms

External Dimensions - 301 x 215 mm

Cutout Diameter - 276 x 189 mm

Mounting Depth - 75 mm

Highest caliber on-wall performance

To expand on the Tribe III’s phenomenal success, Totem is introducing the Tribe V, the next evolutionary step toward on-wall perfection. Featuring the Totem’s Torrent™ driver, the Tribe V provides the highest caliber on-wall performance available.

The Tribe V powerful drivers provide energy, quickness, bass and articulation beyond anything made. New compact high-efficiency exotic alloy tweeter with 3/8-inch thick aluminum faceplate completes the equation. Its 8-ohm easy impedance load along with its earth shattering resolution and wickedly deep and tight bass (down to low 30’s) will make the Tribe V the ultimate center unit and the world’s finest architectural speaker.

Design features

• Vertical or horizontal on-wall mounting
• Magnetic grills included

Technical features

• 4 Totem Torrent™ drivers per unit
• High-efficiency tweeters with aluminum faceplate
• 8 ohm impedance load

Inner power

Discover the most innovative subwoofer ever. Period.
With its sleek design and dazzling performance, the Tribe Sub is filled with inner power. Astonishingly high output levels and low frequency spectrum make the Tribe Sub awe-inspiring.

Ultra-flexible, the Tribe Sub can be used in any direction, horizontal, vertical, straight or flat. This on-wall beauty comes fully equipped with a stand to move it around and absorbent back feet to lay it on its back. It can even be slipped under the couch.

Design features

• Advanced design for simplicity of usage
• Vertical or horizontal on-wall mounting
• Ultra-flexible positioning for optimal sound-effect

Technical features

• 2 ballistic carbon-fiber 8 Inch active woofers
• Comes with external 500 Watt Totem/Bash amplifier
• Each amplifier can operate 2 sub modules
• Cloth magnetic grill, stand & hardware included
• Supported by 6 super-absorbent back-feet

Power and flexibility

With cutting-edge patented technology, the Tribe is luxuriously detailed and perfectly proportioned. Exclusively designed, they are among the slimmest wall speakers available, offering a brocade of rich harmonics with world-leading on- and off-axis dispersion and frequency range.

The Tribe III is a true full-range speaker that activates sound naturally and effortlessly with complete phase coherence and unequalled dispersion. It is truly one of the world’s best speakers. Using Totem’s in-house produced and hand-assembled Torrent™ woofer, it sets new standards in all domains. Nuance, inflection, detail, power and flexibility are just some of its qualities.

Features

• Totem designed and manufactured woofer
• No crossover (filter) used on the Torrent™ woofers
• Slim, sleek chassis that can be used vertically or horizontally
• Flush wall-mounting system
• Magnetic grills included

Cutting edge technology

With cutting-edge, patented technology, the Tribe is luxuriously detailed and perfectly proportioned. Exclusively designed, they are among the slimmest wall speakers available, offering a brocade of rich harmonics with world-leading on- and off-axis dispersion and frequency range.

The Tribe II are not only sonically superb but also cutting-edge technologically. The neodymium-activated, long-throw woofers were designed for speed, clarity and astounding bass extension. All Tribe models are designed to match any application or flat panel display.

Features

• Flush wall-mounting system included
• Neodymium-activated woofers
• Magnetic grills included

Elegance and power

With cutting-edge, patented technology, the Tribe is luxuriously detailed and perfectly proportioned. Exclusively designed, they are among the slimmest wall speakers available, offering a brocade of rich harmonics with world-leading on- and off-axis dispersion and frequency range.

With Totem’s most advanced parts and technology integrated into their sleek chassis, they set the aesthetic and sonic standards for on-wall cinema/surround speaker systems. The integration of this complete surround package is so synergistic that the result has to be heard to be believed.

Features

• Flush wall-mounting system included
• Neodymium-activated woofers
• Magnetic grills included

A revolution is in the air

The all-enclosed, meticulously crafted and astonishing Tribe In-Wall speakers unfold Totem’s legendary imaging, off-axis performance and full-range musicality with majestic and awe-inspiring sound. They completely redefine in-wall/in-ceiling performance and imaging standards.

Designed to engulf and immerse the listener in a totally realistic and believable 3D sonic experience, the Tribe In-Wall redefines exactness, speed and musicality. For easy use under any conditions, they perform with astonishing presence, no matter the size of your space.

Design features

• One-piece construction with high-quality painted back box
• Anodized aluminum front frame
• One-step paintable neodymium-activated aluminum grills
• Even-tension high-torque wall clamps

Technical features

• Easy impedance 6-ohm load
• Bi-wire gold-plated terminals
• Rear-wire management channels
• Neodymium-activated long-throw woofers
• Dual-stage passive radiators
• Extreme-quality hard-wired crossover
• 110 dB peak from pair, 90 dB efficiency

A total inner experience

Fit for any musical genre, the KIN’s sound precision and full spectrum projection allows for a deeper emotional connection with the music. The KIN’s non-shifting image, on-or off-axis, stands clear and defined no matter where one stands in the room. It delivers an incomparable presence in the mid and high frequencies with a breathy and detailed musicality.

Made with interrelated proprietary woofers and tweeters, like the jewel high-performance MHEX cone woofers and the hyper extending dome tweeters, the KIN offers perfect sound staging and phase correctness to bring an absolutely startling emotion-filled room musicality. Designed to expand the musical experience, the new KIN is truly an authentic TOTEM speaker.

Design features

• Steel buttressed front facade
• Streamlined lightweight architecture
• Low margin grill frame with super-flat cushioned grill
• Outer rear dampening brace
• Rear-wire management channels

Technical features

• Minimum usage of crossover
• Extreme quality, ½ pound (225 g) Litz OFC copper air core coil woofer inductor
• PP foil capacitor with sterling silver leads in the tweeter
• Revolutionary absence of any resistor in the KIN crossover circuit
• Easy impedance 6 ohm load (8 ohm in woofer range)
• Bi-wire gold-plated terminals
• High-torque TRIBE angled wall clamps for an even structural tension

Ultra-flexible sound solution

The KIN Mini Flex is one of the most affordable compact high-end solutions on the market. It is designed to interact in perfect harmony and equilibrium with its lineage, the KIN Mini and the KIN Mini Sub.

As part of the KIN Mini series, the new KIN Mini Flex is conceived to be ultra-flexible, ultra-compact and ultra-capable. Up or down, recessed or flat-out, table top, on-wall or on-ceiling, it delivers perfect in-phase precision and accuracy. Even if arranged in an asymmetrical configuration the Flex maintains a balanced soundstage image. Beautifully crafted for simplicity of use, the Flex can be positioned as a left/right or center unit.

The KIN Mini Flex’s ultra-sensitive drivers offer beautifully detailed renditions, retaining their absolute linearity at extreme operating ranges and providing dependable distortion-free performance. The honeycomb cone structure is super light yet incredibly strong, eliminating unwanted vibrational resonance at high output levels while delivering pinpoint musical accuracy.

Perfect for multichannel use, they can be mounted on-wall horizontally or vertically or even upside down if positioned close to the ceiling. The slight front angle tilt allows for optimal downward diffraction. As mentioned, the Flex can even be ceiling mounted if required. That’s true flexibility.

Design features

• Advanced design for simplicity of usage
• Small footprint for easy placement
• Ultra-flexible positioning for optimal sound-effect
• Available in white or black satin

Technical features

• Phenolic honeycomb woofers
• Soft dome tweeter
• Magnetic grill
• 4 super-absorbent feet

A total inner experience

Fit for any musical genre, the KIN’s sound precision and full spectrum projection allows for a deeper emotional connection with the music. The KIN’s non-shifting image, on-or off-axis, stands clear and defined no matter where one stands in the room. It delivers an incomparable presence in the mid and high frequencies with a breathy and detailed musicality.

Made with interrelated proprietary woofers and tweeters, like the jewel high-performance MHEX cone woofers and the hyper extending dome tweeters, the KIN offers perfect sound staging and phase correctness to bring an absolutely startling emotion-filled room musicality. Designed to expand the musical experience, the new KIN is truly an authentic TOTEM speaker.

Design features

• Steel buttressed front facade
• Streamlined lightweight architecture
• Low margin grill frame with super-flat cushioned grill
• Outer rear dampening brace
• Rear-wire management channels

Technical features

• Minimum usage of crossover
• Extreme quality, ½ pound (225 g) Litz OFC copper air core coil woofer inductor
• PP foil capacitor with sterling silver leads in the tweeter
• Revolutionary absence of any resistor in the KIN crossover circuit
• Easy impedance 6 ohm load (8 ohm in woofer range)
• Bi-wire gold-plated terminals
• High-torque TRIBE angled wall clamps for an even structural tension

DESCRIPTION

FEATURES

• Derived from Revel’s award-winning Performa3 Series Loudspeakers
• 6.5"deep anodized aluminum cone woofers
• 1" Aluminum Tweeter
• Fourth generation Acoustic Lens waveguides
• Computer optimized driver positioning and network integration
• No visible fasteners on the front, top or side panels
• Magnetic grilles with brushed metallic logos
• High-gloss Black and High-gloss White painted finishes

SPECIFICATIONS

AQ LABRADOR 229 MKIII COMPACT SPEAKERS

DESCRIPTION

The AQ Labrador series from Acoustique Quality is not new to the AQ lineup. On the contrary, it is a very popular stalwart now using the most recent technological and manufacturing advancements. New construction details and brand new drivers are at the heart of the thoroughly updated Labrador series; what remain are the popular model types. Vifa and Peerless mid-bass drivers were replaced by much higher quality Scan-Speak drivers with cast aluminium frames and asymmetrically shaped cones.

Compact loudspeakers designed for surround duties in Home Theatre environment. Two-way ported design with the port located on the front baffle is treated inside out with aerodynamic design that eliminates typical port chuffing.

Using dedicated wall brackets, Labrador 229 MKIII can be installed directly on the wall. Front baffle uses proprietary sandwich construction with flush mounted drivers. 5” Scan-Speak mid-bass driver with cast aluminium frame, carbon fibre cone and precision Vifa textile dome tweeter works in tandem, covering 60 Hz to 30 kHz and creating stunningly detailed and realistic Home Cinema sound.

SPECIFICATIONS

• System: 2-way, bass-reflex, front-ported
• Tweeter: 1 x 1” Vifa fabric dome
• Woofer: 1 x 5” Scan-Speak carbon-fibre cone
• Impedance: 8 Ohm
• Power Handling: 60W / 120W peak
• Sensitivity: 87dB / 1W / 1m
• Frequency Response: 60Hz - 43kHz within 6dB
• Crossover Slope: 12.6 dB/oct
• Internal Cabling: Pro-Ject cable
• Dimensions (wxhxd): 180 x 380 x 145mm
• Weight: 5kg
• Finishes: Black High Gloss, White High Gloss

Vanishing V Series High Performance In-Wall Rectangular Speaker

• Klippel Distortion Optimization for perfect motor structure, voice coil alignment and suspension, delivering the best performance at any volume level.
• Virtually invisible installations with Polk’s Wafer-thin Sheer Grille™.
• Polk’s exclusive lightweight Dynamic Balance® Polypropylene Cones deliver spectacular midrange clarity, punchy bass and high efficiency.

SPECIFICATIONS

• Tweeter: 1” silk dome, swivel mount
• Woofer:  8” composite polymer
• Sensitivity:  90dB 
• Impedance:  8Ω 
• Freq. Response: 50-25,000Hz (-3dB)
• Power Handling:  10-125w
• Features:  Ideal match to Signature series, wafer-thin grille
• Overall Dimensions: 365mm H x 267mm W
• Cutout Dimensions: 324mm H x 222mm W

DESCRIPTION

The Vanishing Series 255c-RT is the centerpiece of a world-class stealth home theater. Paintable to match any décor, this in-wall center channel speaker blends in perfectly with its surroundings. Anchoring all the action without attracting attention, the 255c-RT ensures all you see is screen, and all you hear is dynamic, crystal clear sound.

DESIGN

PowerPort bass venting is Polk's patented design for smoothly transitioning the air flow from the port into your listening area, eliminating turbulence and distortion, for bigger, more efficient, deep bass impact.

Easy one-cut, drop-in installation puts built-in audio within reach, with Perfect Fit templates, a precision flange, and (available) pre-construction brackets; achieve secure, vibration-free efficiency with a simple turn of the patented Rotating Cam system.

SOUND

Lower tweeter levels offset reflective surfaces, cutting the level in the exact 4-5kHz band where reflectivity destroys sound quality.

Compatible with Polk Audio RTi speakers for seamless blending between traditional and built-in speaker systems.

SPECIFICATIONS

• Tweeter:  1” silk polymer composite dome
• Woofer: 2 x 5.25” mineral-filled polypropylene, front-firing Power Port
• Freq. Response: 50-25,000Hz (-3dB)
• Sensitivity:  90dB 
• Power Handling:  10-150w 
• Impedance:  8Ω 
• Features: Timbre-matched to RTi-A series, wafer-thin grille, tweeter level adjustment
• Overall Dimensions:  237mm H x 376mm W
• Cutout Dimensions:  194mm H x 333mm W

DESCRIPTION

Vanishing Series 265-RT in-wall 3-way speakers with paintable grilles offer full-range, dynamic audio without visible speaker boxes. Superior controls and the patented Power Port® bass venting system guarantee spectacular sound in any room environment. Build a complete high performance audio system that always delivers and never distracts with these low-key loudspeakers.

DESIGN

PowerPort bass venting is Polk's patented design for smoothly transitioning the air flow from the port into your listening area, eliminating turbulence and distortion, for bigger, more efficient, deep bass impact.

Easy one-cut, drop-in installation puts built-in audio within reach, with Perfect Fit templates, a precision flange, and (available) pre-construction brackets; achieve secure, vibration-free efficiency with a simple turn of the patented Rotating Cam system.

SOUND

Lower tweeter levels offset reflective surfaces, cutting the level in the exact 4-5kHz band where reflectivity destroys sound quality.

Compatible with Polk Audio RTi speakers for seamless blending between traditional and built-in speaker systems.

SPECIFICATIONS

• Tweeter:  1” silk polymer composite dome
• Midrange: 6.5” mineral-filled polypropylene
• Woofer: 6.5” mineral-filled polypropylene, front-firing Power Port
• Freq. Response: 45-25,000Hz (-3dB)
• Sensitivity:  91dB 
• Power Handling:  10-200w 
• Impedance:  8Ω 
• Features: Timbre-matched to RTi-A series, wafer-thin grille, tweeter level adjustment, wall distance switch
• Overall Dimensions:  531mm H x 226mm W
• Cutout Dimensions:  503mm H x 184mm W

DESCRIPTION

The Polk V65 in-wall speaker, features a 6.5" Dynamic Balance® polypropylene woofer for a clear midrange and powerful bass, and a swivel mount silk dome tweeter. 

DESIGN

PowerPort bass venting is Polk's patented design for smoothly transitioning the air flow from the port into your listening area, eliminating turbulence and distortion, for bigger, more efficient, deep bass impact.

Easy one-cut, drop-in installation puts built-in audio within reach, with Perfect Fit templates, a precision flange, and (available) pre-construction brackets; achieve secure, vibration-free efficiency with a simple turn of the patented Rotating Cam system.

SOUND

Reflective surfaces in rooms can make sound brighter and cause image distortion. Engaging the Vanishing reflective room compensation feature (by selecting the low setting) lowers the tweeter level to compensate for reflective surfaces. Vanishing reflective room compensation is a custom audio control that cuts the level only in the 4-5kHz range, exactly where reflectivity destroys sound quality. Outside this narrow 1kHz band, the tweeter retains its detailed and accurate high frequency response, for no loss of realistic musical details.

Compatible with Polk Audio RTi speakers for seamless blending between traditional and built-in speaker systems.

SPECIFICATIONS

• Tweeter:  1” silk polymer composite dome
• Woofer: 6.5” mineral-filled polypropylene
• Freq. Response: 50-25,000Hz (-3dB)
• Sensitivity:  90dB 
• Power Handling:  20-125w 
• Impedance:  8Ω 
• Features: Timbre-matched to RTi-A series, wafer-thin grille, tweeter level adjustment
• Overall Dimensions:  365mm H x 226mm W
• Cutout Dimensions:  324mm H x 184mm W

DESCRIPTION

FEATURES

• Long-throw woofers with cast frames and rubber surrounds provide high output with low distortion
• 1-inch (25mm) angle-adjustable, metal-dome tweeter with an integrated waveguide provides optimized response both on and off axis
• High-order crossover network with premium-quality components delivers extraordinarily accurate timbre reproduction
• Three-position tweeter level control lets you adjust for optimum response in a variety of acoustical environments, or for using the speakers without grilles

SPECIFICATIONS

DESCRIPTION

FEATURES

• Long-throw woofers with rubber surrounds provide high output with low distortion
• 1-inch (25mm) metal-dome tweeter with an integrated waveguide provides optimized response both on and off axis
• High-order crossover network delivers accurate timbre reproduction
• Dual-woofer model (W253L) is ideal for installation as left/center/right speakers with a wall-mounted flat-screen TV

SPECIFICATIONS

DESCRIPTION

FEATURES

• Long-throw woofers with cast aluminum frames, MCC (Micro Ceramic Composite) cones and rubber surrounds provide high output with low distortion.
• 1-inch (25mm) aluminum-dome tweeter with an integrated waveguide provides optimized response both on and off axis.
• High-order crossover network with premium-quality components delivers extraordinarily accurate timbre reproduction.
• Boundary compensation switch lets you adjust the speaker to maintain tonal accuracy when the speaker is placed near an additional wall or the ceiling.
• Three-position tweeter level control lets you adjust for optimum response in a variety of acoustical environments, or for using the speakers without grilles.
• High-frequency tilt and listener axis controls help compensate for less-than-ideal speaker placement.

SPECIFICATIONS

DESCRIPTION

FEATURES

• Long-throw woofers with rubber surrounds provide high output with low distortion
• 1-inch (25mm) metal-dome tweeter with an integrated waveguide provides optimized response both on and off axis
• High-order crossover network delivers accurate timbre reproduction
• Three-position tweeter level control lets you adjust for optimum response in a variety of acoustical environments, or for using the speakers without grilles.
• Boundary compensation switch lets you adjust the speaker to maintain tonal accuracy when the speaker is placed near an additional wall or the ceiling

SPECIFICATIONS

DESCRIPTION

FEATURES

• Long-throw woofers with rubber surrounds provide high output with low distortion
• 1-inch (25mm) metal-dome tweeter with an integrated waveguide provides optimized response both on and off axis
• High-order crossover network delivers accurate timbre reproduction
• Three-position tweeter level control lets you adjust for optimum response in a variety of acoustical environments, or for using the speakers without grilles.
• Boundary compensation switch lets you adjust the speaker to maintain tonal accuracy when the speaker is placed near an additional wall or the ceiling

SPECIFICATIONS

DESCRIPTION

FEATURES

• Long-throw woofers with rubber surrounds provide high output with low distortion
• 1-inch (25mm) metal-dome tweeter with an integrated waveguide provides optimized response both on and off axis
• High-order crossover network delivers accurate timbre reproduction
• Three-position tweeter level control lets you adjust for optimum response in a variety of acoustical environments, or for using the speakers without grilles.

SPECIFICATIONS

DESCRIPTION

FEATURES

• Long-throw woofers with rubber surrounds provide high output with low distortion
• 1-inch (25mm) metal-dome tweeter with an integrated waveguide provides optimized response both on and off axis
• High-order crossover network delivers accurate timbre reproduction

SPECIFICATIONS

DESCRIPTION

FEATURES

• Long-throw woofers with rubber surrounds provide high output with low distortion
• 1-inch (25mm) metal-dome tweeter with an integrated waveguide provides optimized response both on and off axis
• High-order crossover network delivers accurate timbre reproduction

SPECIFICATIONS

DESCRIPTION

FEATURES

• Long-throw woofers with cast aluminum frames, MCC (Micro Ceramic Composite) cones and rubber surrounds provide high output with low distortion
• 1-inch (25mm) aluminum-dome tweeter with an integrated waveguide provides optimized response both on and off axis
• High-order crossover network with premium-quality components delivers extraordinarily accurate timbre reproduction
• Boundary compensation switch lets you adjust the speaker to maintain tonal accuracy when the speaker is placed near an additional wall or the ceiling
• Three-position tweeter level control lets you adjust for optimum response in a variety of acoustical environments, or for using the speakers without grilles
• High-frequency tilt and listener axis controls help compensate for less-than-ideal speaker placement

SPECIFICATIONS

DESCRIPTION

FEATURES

• Long-throw woofers with rubber surrounds provide high output with low distortion
• 1-inch (25mm) metal-dome tweeter with an integrated waveguide provides optimized response both on and off axis
• High-order crossover network delivers accurate timbre reproduction
• Boundary compensation switch lets you adjust the speaker to maintain tonal accuracy when the speaker is placed near an additional wall or the ceiling
• Three-position tweeter level control lets you adjust for optimum response in a variety of acoustical environments, or for using the speakers without grilles

SPECIFICATIONS

DESCRIPTION

FEATURES

• Long-throw woofers with rubber surrounds provide high output with low distortion
• 1-inch (25mm) metal-dome tweeter with an integrated waveguide provides optimized response both on and off axis
• High-order crossover network delivers accurate timbre reproduction
• Three-position tweeter level control lets you adjust for optimum response in a variety of acoustical environments, or for using the speakers without grilles
• Boundary compensation switch lets you adjust the speaker to maintain tonal accuracy when the speaker is placed near an additional wall or the ceiling

SPECIFICATIONS

DESCRIPTION

FEATURES

• Long-throw woofers with rubber surrounds provide high output with low distortion
• 1-inch (25mm) metal-dome tweeter with an integrated waveguide provides optimized response both on and off axis
• High-order crossover network delivers accurate timbre reproduction
• Three-position tweeter level control lets you adjust for optimum response in a variety of acoustical environments, or for using the speakers without grilles

SPECIFICATIONS

DESCRIPTION

FEATURES

• Long-throw woofers with rubber surrounds provide high output with low distortion
• 1-inch (25mm) metal-dome tweeter with an integrated waveguide provides optimized response both on and off axis
• High-order crossover network delivers accurate timbre reproduction

SPECIFICATIONS

DESCRIPTION

FEATURES

• Long-throw woofers with rubber surrounds provide high output with low distortion
• 1-inch (25mm) metal-dome tweeter with an integrated waveguide provides optimized response both on and off axis
• High-order crossover network delivers accurate timbre reproduction

SPECIFICATIONS

DESCRIPTION

The performance of Revel Concerta™ on-wall loudspeakers has been extensively evaluated in a variety of on-and near-wall installations through blind listening tests in the Revel Multichannel Listening Lab. Using proprietary 36-point anechoic measurements, Concerta on-wall speakers have been shown to deliver remarkably flat frequency response across an exceptionally wide listening area for clean, accurate sound in real-world listening rooms.

The LCR8 simplifies the look of a multichannel theater system by doing the work of three front speakers. It delivers left, right, and center channel signals with the clean dialogue and distinct imaging you would expect from separate components.

FEATURES

• Rigid aluminum enclosure
• Micro Ceramic Composite (MCC) Cone Woofers
• 1'' Tweeter with advanced waveguide and MCC dome

SPECIFICATIONS

DESCRIPTION

Concerta speakers are voice-matched for use in any combination to build movie and music systems of uncommon realism. The series includes an innovative 3-channel LCR system mounted in a single enclosure, a highly capable center channel speaker, a choice of satellites and an impressive 250-watt powered subwoofer. The B120 sub can be connected directly to your system or operated wirelessly with an optional transmitter, for complete placement freedom.

The M8 is ideal as an inconspicuous surround loudspeaker or front-channel loudspeaker, whether wall-mounted or placed on a shelf. Voice-matched for use in any combination, Concerta speakers build movie and music systems of uncommon realism.

FEATURES

• Rigid aluminum enclosure
• Micro Ceramic Composite (MCC) Cone Woofers
• 1'' Tweeter
• Wall brackets

SPECIFICATIONS

DESCRIPTION

The Revel® Concerta™ M10 speaker continues the longstanding Revel commitment to accurate sound reproduction. The proprietary transducers utilizing Micro Ceramic Composite (MCC) diaphragms, precision dividing networks, sophisticated high-frequency waveguides and rigid enclosures all combine to deliver uncompromising performance in any stereo or multichannel home theater system. In addition, these speakers are magnetically shielded for safe placement near a CRT television.

As the left and right speakers in a music system, or perfectly matched to the Concerta C10 in a home theater system, the M10 delivers superb music reproduction and realistic, all encompassing movie sound to rooms of virtually any size.

FEATURES

• Rigid aluminum enclosure
• Micro Ceramic Composite (MCC) Cone Woofers
• 1'' Tweeter
• Wall brackets
• Three different bases included
• Option STANDM10 loudspeaker stand

SPECIFICATIONS

DESCRIPTION

2-way Dual 5.25" LCR In-Wall Loudspeaker

The JBL Studio 2 architectural series premium loudspeakers represent best in class architectural audio. PolyPlas® woofer cones, CMMD@ lite tweeter and advanced crossover networks as well as pivoting, adjustable-level tweeter all compensate for any acoustical room conditions. The JBL High Definition Imaging (HDI) waveguide ensures that the loudspeaker fills the room with cinema-quality sound The JBL Studio 2 are suitable for installation in any wall or ceiling up to 2" thick.

FEATURES 

SPECIFICATIONS

DESCRIPTION

2-way 6.5" : In-Ceiling Stereo Sound From One Speaker Design.

The JBL Studio 2 architectural series premium loudspeakers represent best in class architectural audio. PolyPlas® woofer cones, CMMD@ lite tweeter and advanced crossover networks as well as pivoting, adjustable-level tweeter all compensate for any acoustical room conditions. The JBL High Definition Imaging (HDI) waveguide ensures that the loudspeaker fills the room with cinema-quality sound The JBL Studio 2 are suitable for installation in any wall or ceiling up to 2" thick.

FEATURES 

SPECIFICATIONS