Manual turntable with T-shaped plinth. Includes Nagaoka MP-110 moving magnet cartridge.
The base of the MT-1602 Magnetic turntable is made from stainless steel square profiles. Applied design minimized the impact of vibrations from the environment. The T-shaped base has three adjustable feet to easily level the turntable.
The tonearm is made from stainless steel and brass (polished to a high gloss). The bearing arm is suspended in a magnetic field, providing maximum isolation from the rest of the turntable and eliminating any friction elements. The inertia of this arm is very large.
Centripetal force in such arms is overcome by adjusting the weight. The mechanism has been designed to precisely adjust the strength to overcomes skating. By appropriate adjustment we get variable strength at the beginning and the end of the plate, allowing the needle to run freely and without distortion at any position on the disc. The insert is also isolated from the tonearm with a special holder. This holder is made from two rings connected together with a rubber spring element.
Tonearm = Magnetic Tonearm
Model = MT-1602 – 12”
Optional counterweight = for cartridges 4 – 12g
Downforce range = 5 – 30mN
Drive = belt to sub-platter
Motor = synchronous AC
RCA, Ground = jack gold plated
Speed range = 33,33 / 45 r.p.m.
Speed Variance = +/- 0,6%
Wow & Flutter = +/- 0,15%
Signal to Noise Ratio = -68dB
Speed change = manual
The length of the active arm = 300mm
Overhang = 15mm
Offset angle = 19
Effective mass = 10g
Total mass = 600g
Anti skating = variable at the beginning and end of the disc
Arm Height Adjustment (VTA) = + / – 15mm
Base Height Adjustment = +/- 5mm
Platter weight / diameter / height = 2kg / 310 / 30
Dimensions (mm) = 485 x 310 x 200
Weight = 7kg
Power supply = 240V / 50Hz
Power consumption = 2W
Colour = Black