F300C CENTRE SPEAKER
The price may be ultra-affordable but the Fyne Audio F300 range benefits from the very best technical and acoustic expertise in the loudspeaker industry. Offering a scale of specification and acoustic performance unrivalled at its price, the line-up provides versatility for music lovers and movie enthusiasts.
The F300C is a dedicated centre channel loudspeaker voice matched to other models in the F300 range, delivering crystal clear dialogue and focused central vocals for multichannel music and home theatre applications.
Compact enough to fit into a variety of TV cabinets yet potent enough to match even the impressive F303 floorstander, this landscape loudspeaker packs two 125mm (5″) mid / bass drivers and a 25mm (1″) polyester dome tweeter in a rear-ported 6.2 litre cabinet.
A well-constructed cabinet is the starting point for any high-performance loudspeaker. Exceptional rigidity is provided on all F300 models through a combination of MDF panels which are cross-braced internally. Additional stiffness is achieved by coupling the low frequency driver’s magnet to the cabinet bracing using a resonant-absorbing mastic. Widening the footprint on the floor standing models, using a plinth with floor coupling spikes, provides stability for tight bass and accurate stereo imaging.
Optimal performance of each of the F300 models is assured by using the highest quality precision components within the crossover, including low loss Low Frequency laminated core inductor and High Frequency polypropylene capacitors. Although the designs are computer optimised, fine-tuning is always undertaken through critical auditioning.
Fyne Audio aims to provide best in class performance at all price levels and the careful component selection for the F300 drivers helps to meet this goal.
Utilising a multifibre reinforced paper cone on the bass/midrange drivers delivers natural sounding midrange frequencies and clean transient behaviour. Fitted to the centre of the driver is a phase plug which provides smooth midrange roll-off characteristics, coupled with FyneFlute™ technology, used on the driver’s rubber roll surround, provide a non-homogeneous interface which very effectively terminates unwanted cone energy.
The F-300 tweeter combines a powerful Neodymium magnet system with a 25mm Polyester dome producing crisp and controlled high frequency detail. Integrated within the protective mesh cover is a phase loss compensator which delays the output from specific areas of the dome to give a smooth and extended time-aligned response.
|System Type||2 way, rear ported|
|Recommended amplifier power (Watt RMS)||25- 100|
|Continuous power handling (Watt RMS)||50|
|Sensitivity (2.83 Volt @ 1m)||87dB|
|Nominal impedance||8 Ohm|
|Frequency response (-6dB typical in room)||65Hz- 28kHz|
|Drive unit complement||2 x 125mm multi-fibre bass / mid. 1 x 25 mm polyester dome tweeter|
|Crossover type||2nd order low pass, 3rd order high pass|
|Dimensions - HxWxD||156 x 400 x 211mm (6.1 x 15.8 x 8.3”)|
|Weight - Each||5.5kg (12.1lbs)|
|Finishes||Walnut / Black Ash / Light Oak|