Fyne Audio f300lcr home theatre lcr speaker - Audio Influence Australia
Fyne Audio f300lcr home theatre lcr speaker - Audio Influence Australia 2
Fyne Audio f300lcr home theatre lcr speaker - Audio Influence Australia 3
Fyne Audio f300lcr home theatre lcr speaker - Audio Influence Australia 4
Fyne Audio f300lcr home theatre lcr speaker - Audio Influence Australia 5
Fyne Audio f300lcr home theatre lcr speaker - Audio Influence Australia
Fyne Audio f300lcr home theatre lcr speaker - Audio Influence Australia 2
Fyne Audio f300lcr home theatre lcr speaker - Audio Influence Australia 3
Fyne Audio f300lcr home theatre lcr speaker - Audio Influence Australia 4
Fyne Audio f300lcr home theatre lcr speaker - Audio Influence Australia 5

Fyne Audio F300LCR Home Cinema On-Wall Speaker

Regular price $395.00 Save $0.00
/

Or 10 interest free payments from $39.50 with What's this?

Only 0 items in stock!

F300LCR LCR SPEAKER

DESCRIPTION

The price may be ultra-affordable but the Fyne Audio F300 range benefits from the very best technical and acoustic expertise in the loudspeaker industry. Offering a scale of specification and acoustic performance unrivalled at its price, the line-up provides versatility for music lovers and movie enthusiasts.

The Fyne Audio F300LCR is a compact on-wall loudspeaker bringing the performance and value of the F300 series to discrete home AV installation. The cabinet and driver arrangement hail from the well regarded Fyne Audio F300C centre channel design, reducing cabinet depth to improve aesthetics on wall. Equally at home as stereo loudspeakers, a centre channel or for surround sound, the F300LCR deploys two 125mm mid/bass drivers and a 25mm polyester tweeter in D’Apolitto configuration for the widest sound stage. Crossing over at 80Hz and boasting high 90db/W efficiency, the F300LCR is ideal for budget home cinema installations.

 

FEATURES

Cabinet

A well-constructed cabinet is the starting point for any high-performance loudspeaker. Exceptional rigidity is provided on all F300 models through a combination of MDF panels which are cross-braced internally. Additional stiffness is achieved by coupling the low frequency driver’s magnet to the cabinet bracing using a resonant-absorbing mastic. Widening the footprint on the floor standing models, using a plinth with floor coupling spikes, provides stability for tight bass and accurate stereo imaging.

Crossover

Optimal performance of each of the F300 models is assured by using the highest quality precision components within the crossover, including low loss Low Frequency laminated core inductor and High Frequency polypropylene capacitors. Although the designs are computer optimised, fine-tuning is always undertaken through critical auditioning. 

Driver Technology

Fyne Audio aims to provide best in class performance at all price levels and the careful component selection for the F300 drivers helps to meet this goal.

Utilising a multifibre reinforced paper cone on the bass/midrange drivers delivers natural sounding midrange frequencies and clean transient behaviour. Fitted to the centre of the driver is a phase plug which provides smooth midrange roll-off characteristics, coupled with FyneFlute™ technology, used on the driver’s rubber roll surround, provide a non-homogeneous interface which very effectively terminates unwanted cone energy.

Tweeter

The F-300 tweeter combines a powerful Neodymium magnet system with a 25mm Polyester dome producing crisp and controlled high frequency detail. Integrated within the protective mesh cover is a phase loss compensator which delays the output from specific areas of the dome to give a smooth and extended time-aligned response.

 

SPECIFICATIONS

System Type 2 way, closed box
Recommended amplifier power (Watt RMS) 25- 100
Continuous power handling (Watt RMS) 50
Sensitivity (2.83 Volt @ 1m) 90dB
Nominal impedance 8 Ohm
Frequency response (-6dB typical in room) 80Hz - 28kHz
Drive unit complement 2 x 125mm multi-fibre bass / mid. 1 x 25 mm polyester dome tweeter
Crossover frequency 3.4kHz
Crossover type 2nd order low pass, 1st order high pass
Dimensions - HxWxD 156 x 400 x 120mm (6.1 x 15.8 x 4.7”)
Weight - Each TBC
Finishes Walnut / Black Ash / Light Oak

 

Free shipping Australia wide on all orders over $150. 
$15 flat rate for all other orders.

30-day postage paid returns.