Japanese AKM AK990EN, highly trusted DAC used across many levels of Hi-Fi products, assuring natural and smooth sound.
Using FPGA coding technology independently developed by Shanling, paired with two independent high-quality KDS crystal oscillators.
With TI OPA1612 acting as a low-pass filter, two pieces of ADI AD8397 amplifiers and high-quality Panasonic capacitors Shanling M2X provides clean, powerful and dynamic sound.
To prevent undesirable noise interference and electromagnetic radiation from affecting audio performance, parts of audio circuit are shielded with copper plate.
| Dimensions: 90 x 60 x 16 mm |
| Output power: 180mW (single ended) / 212mW (balanced) |
| Screen: 3.2 inch 320 x 480 touch screen |
| Output impedance: 1 Ohm (single ended) / 2 Ohm (balanced) |
| Weight: approx 147 g |
| Channel separation: 70 dB (single ended) / 107dB (balanced) |
| DAC Model: AK4490EN |
| Recommended headphone impedance: 8-300 ohms |
| Battery Life time: up to 10.5 hours (single ended) / 7.5 hours (balanced) |
| Frequency response: 20Hz~40kHz ( -0.5 dB ) |
| Deep standby: up to 39 days |
| Distortion: 0.0015% |
| Charging time: 2 hours (based on 2A charger) |
| Signal to Noise Ratio: 117 dB (A-weighting) |
| Battery capacity: 2400 mAh lithium battery |
| Storage: up to 2TB Micro SD card (purchased separately) |
| Dynamic Range: > 116 dB |
| Output port: 3.5mm (single ended) / 2.5mm (balanced) |
| Sampling rate: up to 384kHz / 32 bit, DSD64 & DSD128 & DSD256 |
| Bluetooth Codecs: LDAC, AAC, SBC (two-way) and apt-X (transmit) |
| USB: Bi-directional, connect to offboard DAC (output) or use as sound |
| device for computer or tablet/phone (input) |
| Wi-fi standard: IEEE 802.11b/g/n |
| Wifi features: DLNA / Airplay / OTA Firmware Updates / Tidal |
