The MC-TWO Special MC Cartridge is a high output version of the MC-ONE Special with improved resolution capabilities and output voltage. Equipped with a thicker frontpole and an extra small magnet, this cartridge has a production time of about two weeks and boasts impressive specifications such as a frequency range of 5-50,000 Hz and channel separation of >35/>30 dB at 1kHz/10kHz.
THE MC-TWO SPECIAL MC CARTRIDGE
DESCRIPTION
The MC-TWO Special High output version of the MC - ONE Special with 2.25 mV/channel and matched crystal copper-wire coils. The designation “Special” in this cartridge’s name indicates important improvements over its previous version
The cartridge is equipped with a thicker frontpole and an extra small magnet, both further enhancing its resolution capabilities and output voltage.
Production time:
The production time for a MC-TWO Special cartridge after ordering is about two weeks.
SPECIFICATIONS
Stylus Shape: | VDH - I |
Stylus Radii: | 3 x 85 Micron |
Frequency Range: | 5 - 50.000 Hz |
Tracking Force: | 13.5 - 15.0 mN |
Static Compliance: | 28 Micron/mN |
Tracking Ability at 15mN at 315Hz: | 70 - 80 Micron |
Output Voltage at 1 kHz at 5.7 cm/s eff.: | 2.25 mV RMS |
Channel Unbalance: | < 0.5 dB |
Channel Separation at 1kHz / 10kHz: | > 35 / > 30 dB |
Equivalent Stylus Tip Mass: | 0.35 Milligram |
System Weight: | 8.2 Gram |
Vertical Tracking Angle : | 22 Degrees |
Optimum Load Capacitance: | see (*2) |
Recommended Load Impedance: | 47k (> 1k) Ohm |
Recommended Eff Tone arm Mass: | 8 - 12 Gram |
Moving Coil Resistance per channel: | 96 Ohm +/- 10% |