Vertere Verum Solo Reference-standard Analogue Tonearm Cable

The veRum Solo Analogue Tonearm Cable is a high-performance cable that offers similar sonic qualities to Vertere's benchmark Pulse-HB, but at a lower cost. It includes two veRum cables and a separate Special Ground/Power Conductor set, and is internally configured to conduct delicate phono signals and accommodate substantial RIAA equalization on LPs.

Vertere Verum Solo Tonearm Cable

The new veRum Solo reference-standard Analogue Tonearm Cable offers superlative performance and is closest in design and sonic attainment to Vertere’s benchmark Pulse-HB.

Manufactured on precision machines with the most delicate tolerance cable manufacturing machinery in Europe. veRum brings a large proportion of the reference Pulse HB's neutrality, dynamics and even-handed performance without the high costs involved in being hugely labour intensive and using wire so delicate that four together are thinner than a human hair. 

veRum Solo includes two VeRum cables and a separate Special Ground/Power Conductor set. The extra set includes two tinned high-purity copper conductors with a PVC dielectric, shielded by a special foil and tinned copper braid, all enclosed in a PVC outer. Surrounding all three PVC enclosed wires is a cotton filler for damping and a final PVC outer jacket for protection.

Like the absolute reference Pulse-HB, veRum Analogue Tonearm Cable is internally configured to suit the miniature cartridge generator. This construction conducts the delicate phono signal as well as accommodating the substantial RIAA equalisation on the LP. The low frequencies, recorded at much attenuated levels, are conducted just as effectively as the higher level high frequencies.

Each veRum cable (one channel) includes:

• Two signal and two return Pulse Hairline silver-plated high-purity copper multi-stranded wires with an FEP dielectric 

• One signal and one return Microline silver-plated high-purity copper multi-stranded wires insulated with an FEP dielectric  

• One signal and one return Modeline silver-plated high-purity copper multi-stranded wires with an FEP dielectric 

• Custom length options available, please contact us if you require an alternative length.

Technical Specifications

Type
Tonearm Cable (2x Interconnects, 1x Ground/Power & Outer Covering)

Termination and Length
Tonearm DIN to RCA, XLR 1.15m (Additional lengths in 0.5m steps)

Cable Type (Each Interconnect)
x9 Conductors, Vertere Pulse Multi Type
x1 Ground, x4 Signal (Hot), x4 Signal (Return)
x2 Conductors & Braid 

Ground/Power
x2 Conductors & Braid

Outer
Filler & Braid

Conductor
High Purity Copper

Plating
Silver, Tin

Insulation
FEP, PVC

Shield
Main Braid + Special foil Inner Wrap – on all four cables

Connector
Vertere Tonearm DIN, veRum RCA & XLR – Gold Plated contacts
x2 Splitters with 210mm free cable – on Amplifier side

Size
4.7mm Dia. – interconnects
3.0mm Dia. – Ground/Power
12.0mm Dia. – Outer
18.0mm Dia. – Splitter